Autonomous tilt rotor drone
@Sstage wrote: Using my Form2 to create functional, 1 off motor mounts, landing gear fixtures, and sensor mounts for an vtol drone running arduplane on a pixhawk. I'm currently fighting with material...
View ArticleGrey V3 dispensing issues
@selena wrote: Hi, I am experiencing issues with the grey resin on the form 2. I recently received the new V3 and first issue was the resin would not dispense. I realised that this was because the...
View Article,vol Files (3d Ultrasound IMages)
@metcheverryc wrote: How is it possible to print a .vol file (obtained from a 3D unltrasound)? Posts: 1 Participants: 1 Read full topic
View ArticleForm 2 Pouring Resin from 1 Tray to Another
@innovtr wrote: Good day! I'm back and my Form 2 has made it home after a brief trip to repairs. Question: If you pour say white resin from a tank that is bad to a new tank that is good can that new...
View ArticleClik here to view.
Preform - not eye-friendly colour
@filtrec wrote: Recently I started to work with High Temp resin; I was used to work with standard Grey resin.I noticed immediatly that using a different resin, the colour of the part changes: for High...
View ArticleClik here to view.
My print comes out badly
@ThibautSa wrote: Hello there ! Look at my print do you have any explanation about this trouble. Does someone already experienced this ? Thank you. Posts: 4 Participants: 2 Read full topic
View ArticleResin bends during post curing
@AbkAmin wrote: I am using grey resin. When I put the 3D printed resin object inside the post cure box, the objects comes out blended. I am using a nail spa for uv cure box. I keep resin objects for...
View ArticleBest resin for mold?
@goujonrichard wrote: Hello everyone!I was wondering what would be the best resin to print a mold for cold and hot injection? Thanks a lot! Richard Posts: 2 Participants: 2 Read full topic
View ArticleMassive offset in between build platform and resin tank while printing
@jongranados wrote: Hi everyone, I'm running into an issue where the build platform and the resin tank are not meeting as the machine tries to print. It's almost as if there's a massive offset (at...
View Article[Preform] Multiple selections with CTRL+click
@JohnHue wrote: Hi there, This has been suggested back in 2013 (another one here) We can select multiple bodies by click and drag but if for example I want to re-generate supports for multiple parts...
View ArticleSmart job, print shifter
@David_Russell wrote: I print a lot of the same part. Currently, i need to move my part slightly in preform and send a exhausting relaunch. If I dont move the part, my print tray burns out fast with...
View ArticleLeaking Cartridge?
@Sni9er wrote: I loaded a new tank and cartridge yesterday and before my print begunIi received an error telling me there was too much resin, Assuming it was a one off error I used a syringe to remove...
View ArticleDamaged files
@Drgabbay wrote: Recently i downloaded the new version of prefofm sw. I encounter a problem that any printable file is recognized as damaged. The sw suggests repairing it but nothing hapens . What can...
View ArticleWhich resin best to resist laser etching
@jeneva3dprint wrote: I have a customer who wants me to print a part to be used to hold metal for laser etching. Anyone had experience of which material resists laser etching? Posts: 1 Participants: 1...
View ArticleTolerance for press fit parts
@Joe90 wrote: Would you have any idea what sort of offset you would need to produce a press-fit part? How tight can the part be? Posts: 1 Participants: 1 Read full topic
View ArticleLeave Supports when changing materials
@Scottua wrote: I spend quite a bit of time laying out support touch points and would love it if there was an option to leave them when changing materials. Let preform show me via the printability...
View ArticleClik here to view.
Leaky tank leads to resin everywhere
@AP_Diving wrote: A warning/show and tell for you all. Upon changing tank this morning, I noticed a nice pool of resin in the internals of the printer. Luckily none on the glass screen but I am yet to...
View ArticleClik here to view.
Completing the Matte Lineup With New Black and White Resins
@Frew wrote: Earlier this year, we released our first matte material, Grey V3, and today we're excited to complete the matte lineup with new Black and White Resins. The new materials bring a smooth...
View ArticleCentury3D – Formlabs Mexico Partners
@Carolina wrote: Hi,We are Century 3D Company, official represents and distributors of Formlabs in Mexico.We have all you need about Formlabs (printers, consumables and support) We are excited to help...
View ArticleClik here to view.
Airflow to flasks (Burnout)
@heidemann wrote: Hi Formlab users, I'm new in 3d printing/casting. Today have I received my burnout kiln. I have bought a Prometheus Kiln Pro-7 on cooksongold but unfortunately did cooksongold not...
View Article