Preform Update 2.11.3 does not respond
@Theblackcomet wrote: After the new update, preform will no longer open properly. I am left with a white screen that does not allow me to interact with the software in any way. If I restart my...
View ArticleOverburning for highlighting areas of interest
@JaKla wrote: Hello everyone, With many sla machines it is possible to highlight areas by having the laser cure certain parts longer or more often than normal. Does anyone know if that might be...
View ArticleUrgent need for help printing (Vancouver / Boston)
@Richard_Kagerer wrote: Hi folks, Is anyone here in the Vancouver area (or maybe Boston), and if so could you help me out of a jam by running some prints over the weekend? I had two printers and...
View ArticleClik here to view.
Oops I did it again... custom fidget spinners
@BJBenterprises wrote: Once again our Form 2 printer comes in hand to show the process of mold making for Custom Fidget Spinners! The problem is, now everyone in the office wants one. The good thing...
View ArticleClik here to view.
Part not sticking to the build plateform
@fabreax wrote: Hi, My latest print failed only after few layers : IMG_20170603_192419.jpg1984x1488 262 KB The base is not sticking to the build plate (I always clean the build plate with IPA and let...
View ArticleConverting milliwatts/cm2 to lumens/cm2
@mjncad wrote: OK, I noticed on the tech sheet for the gray resin that Formlabs determined the optimal UV light output is 1.25 milliwatts per square centimeter. Does anyone know how to convert that to...
View ArticleClik here to view.
Bed stucked in oblique position
@Alessandro_Randi wrote: Hello,I was printing a pretty small object with my F1+ (which lately had some issues, fortunately fixed) and I heard a strange noise during the peeling phase.I then took a...
View ArticleAnyone doing 3D prints from TurboCAD Pro Platinum?
@jmwright1058 wrote: Is anyone out there doing 3D prints using TurboCAD Pro Platinum? When I open .stl files created from TurboCAD Pro Platinum 2017 in PreForm, it says some loaded models are damaged...
View ArticleReview and testing of the Form 2 in direct comparison to the Form 1+
@Jens_Schnabel wrote: Hello everyone, I finally was able to finish the review of the Form 2, focusing on the changes and how or if they affect what the machine is supposed to do, building parts (in...
View ArticleClik here to view.
Form1+ Laser Focus Problem
@sgraber wrote: Lately I've been having some problems with my Form1+. All of my parts suddenly started turning out "blobby" and at this point I believe I have traced it down to the laser being out of...
View ArticleClik here to view.
How to prevent bowing /warping of "flat" parts
@David_Boydston wrote: Hi,I've tried printing this part like 6 different times in different orientations, but I keep getting these "Warping" or bowing parts and I cant figure out why it does that,...
View ArticleThe Fuse 1 and Form Cell: Putting the Means of Production in Your Hands
@Frew wrote: Today at The Digital Factory, Formlabs announced two new product lines, both years in the making. We’re excited to introduce the Fuse 1, a 3D printer that brings the industrial power of...
View ArticlePrecious Metal Printing Fuse 1?
@KBS756 wrote: Hi ... Would love precious metal printing (Gold, Silver, Platinum) with the Fuse1 ... Assuming this is something your working on hope it will be confirmed? If its possible on the Fuse 1...
View ArticleClik here to view.
Can I 3D scan an item that I'd like to 3D print?
@gschwiersch wrote: Hi, I'd like to 3D scan (then print) an item that was created on a CNC router. Any advice on how to do this? Thanks,Gail Posts: 4 Participants: 4 Read full topic
View ArticleDIY Form2 UV cure box with turntable for ~ $100
@Smisra1968 wrote: Before Formlabs released the Curebox, I built this.- Wood box that I had laying around- Covered the insides with reflective vinyl- Attached a nail drying tube UV box on top as a...
View ArticleDying durable resin
@csauve wrote: Does anyone know if it's safe to dye durable resin before printing. Will it cause any breakdown in the resin properties?Thanks for any input. Posts: 2 Participants: 2 Read full topic
View ArticleDeploying PreForm silently
@ScottS wrote: Thanks to my friends at PDQ.com i am now silently deploying PreForm software to our Windows users:...
View ArticleWhite V2 Cartridge "...has exceeded its lifespan and must be replaced" after...
@yoderkl wrote: Hello, I have only printed one print with my White V2, and I just went to go print again today and had two issues: 1) An error came up saying "Cartridge Worn Out" and that "This...
View ArticleClik here to view.
So what happened here?
@ScottBarbour wrote: Been printing like crazy on the Form2 and not been using the Form 1+ much but I have so much to print, I fired it up. On the third batch I get what you see in the pictures below....
View ArticleFormlabs Developers Conference
@vincentsiu8899 wrote: Will the entire formlabs developers conference be available to watch at some point in time? Posts: 1 Participants: 1 Read full topic
View Article