PreForm startup
@DavidDaCosta wrote: Why does PreForm take so long to startup (30-60 seconds)? David Posts: 2 Participants: 2 Read full topic
View ArticleSecond hand Form1+, not possible to upgrade firmware or fine tune
@RudydG wrote: Hello, bought a second hand defect form1+, have it printing now. Had to manualy adjust the 4 screws under the tray to get the building platform touch the bottom of the vat, now it is...
View ArticleForm Failed print 2 only supports being printed?
@ArchonStudio wrote: Ok, so a brand new printer. Symptoms: Ran a long 3d print, that ended up with some missing details. After setting up the same elements, the printer only printed supports, there...
View ArticleWhat version of Preform is best for Form1+
@jmwright1058 wrote: What version of Preform works best for the Form1+. I notice different features are available for different versions. I have 1.8.2, 2.11.3, 2.12.3, 2.13.1, 2.14.0, 2.15.0_build_114...
View ArticleChemical resistant resin
@Brollan82 wrote: Any resin suggestions for parts that can withstand over 70 degree celcius and sulphuric acid, approx. 30 % Posts: 2 Participants: 2 Read full topic
View ArticleSticky parts toxic?
@PrintMan wrote: Hi, I am new to Formlabs printing. I got a few parts from someone else, that are printed in the Form 2 printer with Tough V4. But somehow the parts are sticky on the surface. Is it...
View ArticleNextdent C&B - Your settings in Open Mode
@mitzekotze wrote: Hey there could you please provide me some informations about your settings for printing C&B from Nextdent. The settings which are available in the google list in the forum...
View ArticleClik here to view.
Black Flex Resin Mix from ALW
@Walter_Gillespie wrote: Here is some information sent to me by Kevin of Applied Lab Works on a mixture of Black and Flex resins to come up with a nice detail resin that has more flex and less shatter...
View ArticleFORM CURE preheat or NOT!
@alan1950 wrote: I have been using the WASH and CURE but I have been starting the CURE before the WASH is completed in order to have the CURE at 60 before I place the print into the CURE DOES THAT...
View ArticleMy 3D Space mouse does not work in the latest PreForm
@alan1950 wrote: I have 3D Connexion Space Mouse PRO. It does nothing in the latest PreForm that I thought was integrated in the previous version of PreForm. The Space Mouse has no trouble working in...
View ArticleWhite Resin for Sale
@vtgemlab wrote: Greetings, I ordered a white resin 1L for the form2. I didn’t realize that it was only good for 0.50 microns. I’m looking to sell it (can’t return it because the plastic sleeve was...
View ArticleOpenFL should be released for all forms
@sharpknlfe wrote: I think openFl really opens this printer to a world of tinkering and programming, without it im not sure if i would like my form 1… And not seeing it released for the form 2 is sort...
View ArticleClik here to view.
Black resin is cracking...strange circles and pools
@jacobkemper wrote: Still getting weird issues with my latest batch of black resin …this time things are cracking unnamed (4).jpg.png500x742 483 KB Posts: 3 Participants: 1 Read full topic
View ArticleClik here to view.
MakerJuice SF Yellow (OpenFL ini) included
@sharpknlfe wrote: MakeJuice SF (yellow) OpenFL ini ringscreenshot.png1922x1039 87.3 KB ; rsz_1rsz_1mjyellow1.jpg496x631 34.1 KB rsz_mjyellow3.jpg994x1263 126 KB Ring printed using MakerJuice SF...
View ArticlePost Cure Raft Usage
@Alex8839 wrote: Just had my first few prints on the Form 2, I was wondering if anyone has any suggestions or ideas on ways the rafts and supports can be used after curing. With my other printers when...
View ArticleWiden support base (trouble with WaxCast staying on build plate)
@jeremiahlandi wrote: Hello, I have a FormLabs 1+ and have been running WaxCast out of a Zavt container. I am having issues with the WaxCast sticking to the build plate. I have tried roughing up the...
View ArticleHeat Map for LT tank not showing
@jasony31 wrote: Hi there! It was about time to replace my original “old style” tank so I took it out, filtered the resin, and installed a new LT tank. I poured the filtered resin back and and the...
View ArticleSafe to remove resin cartridge to shake?
@jasony31 wrote: I have a grey resin cartridge that has been in my Form2 for a few months now and I’m starting to get concerned about possible resin separation in the cartridge. I would like to pop...
View ArticleError 41 Issues Here Too!
@Mitch_Gates wrote: I’m seeing a recent outbreak of Error 41 posts on the forum, but all existing threads have been closed. After dealing with this problem for about 6 months it looks like I will have...
View ArticleClik here to view.
What’s causing this orange peel texture and jagged supports in my prints?
@cGreen wrote: The last few prints I’ve done in black resin on my Form 2 have come out with odd textures where they should be smooth, and this latest print had created some jagged looking supports....
View Article