Clik here to view.
Cell phone sms notifications
@shawny2005 wrote: Wow!!! Just realized printer can text you when prints finish or have issues. This feature is fucking Awesome. I wish this was a part of onboarding....
View ArticleDurable resin coloring
@xnUMb wrote: Hi, I have been trying to color durable resin with Cyan Color Pigment. I used ½ (app 58ml) of the bottle provided from formlabs to mix 1L of durable v2 resin. I used a brand new tank....
View ArticleBetter Customer Support
@Slider89 wrote: I am a huge fan of Formlabs. Our startup Arbor Grace uses our Formlab2 nearly round-the-clock in building medical device prototypes. However … the customer support needs to improve....
View ArticleTracking App
@Slider89 wrote: Does Formlab plan to release an app to allow print tracking on smartphones? Its not a ‘must-have’ by any means. Sometimes, we do detailed prints that take 18-20 hours and it runs...
View ArticleProtected Surfaces Feature in Preform Print Supports
@Slider89 wrote: A number of our prints require fine finishes on certain surfaces. These finishes are easier to achieve when the supports are not attached. The process today is to apply the support...
View ArticleBuilding right off the platform
@rod6 wrote: what is the process for building right off the platform using soft resin(like rubber) Posts: 6 Participants: 5 Read full topic
View ArticleClik here to view.
Partial error in the Print
@UFO70 wrote: Hello, the first layers after the support structure (5mm high) remain partly wet and wavy, the rest is completely ok. Anybody have any idea what’s causing this? Printer and resin are one...
View ArticleAlcohol ethyl is ok?
@lamaid1 wrote: Hi We have Ethyl alcohol 99.5% for the finish kit , did someone try it ? is it ok to use, will it work the same as the IPA ? Thanks ! Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Holes on model surface
@Twinblock wrote: Just printed probably the best orthodontic study we have done so far. That’s is before removing the supports this revealed multiple small voids or holes perhaps 1-1.5 mm deep see...
View ArticleClik here to view.
Issues Printing Apertures and Rough Finishes
@Picc05 wrote: So I have a tool I was trying to print and it hasn’t been going well with the Black v4. I have a rectangular aperture sized at 0.025" x 0.5" that I am having difficulty getting to...
View ArticleTuning for Quality in OpenFL Material Configuration Files
@jmwright1058 wrote: Having just begin using OpenFL I’m achieving some success creating a custom material configuration file. From a starting point of printing only the base and tiny nubs for...
View ArticleSpecific gravity of Formlabs resins
@CMSDesign wrote: Hi I am a new user of FL2 kit, and wanted to ask if you can tell me the SG of the resins you supply I see you that you say the jewellery resin is 1.16 - so the others would be most...
View ArticleClik here to view.
Support rafts are inconsistently filled in... causes peel problems
@KevinHolmes wrote: See the attached screenshot - it’s a large part - In Profile - but not in volume or in slice volumes. The support raft however is filled in for the entire profile, when I print a...
View ArticleClik here to view.
Safer support rafts for large parts with inner hollows (oversized rafts can...
@KevinHolmes wrote: At the moment it’s an unfair lottery when generating supports on large parts with hollow insides as to whether the raft will be hollow to match or whether the raft will be a solid...
View ArticleClik here to view.
Support failure during print
@J_M_CADKINGS wrote: Just printed a small assembly project for R&D purposes in the Tough V4 at 0.05mm layer thickness. 2 of the parts printed were identical including supports and orientation etc…...
View ArticleNew Form 2, nothing is being printed
@JordanDraper wrote: I just setup my Form 2, I’ve tried printing 5 times and every time there is nothing there when it finishes. I am using clear resin, I don’t see anything in the bottom tank or the...
View ArticleNew resin tank but Dashboard not detecting it
@Marcologue wrote: Hey there, I have inserted a new resin tank but Dashboard is not noticing and showing me the usage map from the old one. Hello there! Are you available for freelance from May 7th to...
View ArticleStacked trays leaking everywhere
@shawny2005 wrote: Damn this sucks. I’m not really sure what happened, but it seems like a few of my trays broke in the same spot. Appears to be the back left corner of the inside of the tray. Resin...
View ArticleDashboard privacy loophole still here
@Olivier_Suire wrote: Privacy over the internet is a hot topic, and I realize that Formlabs treats it with amateurism. A few weeks back, I sent back “StrongFrog” due to repeated sensor issues, and got...
View ArticleRepeated Pause Errors during print
@dcurrington wrote: I’ve had my form 2 for about a month now. The damn thing prints great. However, depending on the length of the print, i have 10-15 pause print errors due to the resin cartridge...
View Article