Clik here to view.
Cow Skull
@toecutter wrote: Hey all - Just wanted to share my latest project. I derived this mesh via photogrammetry. 153 or so photographs crunched through Photoscan with the resulting mesh cleaned, and parted...
View ArticleUsing resin for masking
@AndreSant39Anna wrote: Repeated here from a reply so there's a better searchable title in order to share with community ... Hi, I've used Grey V2 resin to create masks on aluminum with great results!...
View ArticleFuse – Control+P print queue, auto orient, with end-of-day cycle start
@lukepighetti wrote: I keep imagining a world where you can Command+P your 2d prints AND your 3d prints. There are certainly a lot of ways to skin this proverbial cat, but here's what I imagine....
View ArticleFuse – Part baskets
@lukepighetti wrote: It would be cool to put parts from a subassembly inside an print-in-place cage/basket that was numbered or marked with a name. That way you can print multiple sub-assemblies and...
View ArticleZBrush 4R8... Print hub problems
@WiltonShagpile wrote: We have just updated to 4R8 and the 3d print exporter does not work when trying to accessing Proform directly with the "send to Proform button". popup Error message,Sorry,...
View ArticleForm 2 post cure warping
@TonyDelnevo wrote: Hello all, I have seen a bunch of threads regarding warping. And am hoping you guys can help direct me to find a solution. Every single print i have completed on the form 1+ and...
View ArticleSimple functional parts made with the Form2
@Jens_Schnabel wrote: Here is another short video on some simple yet functional parts made with the Form2. In this case there is nothing on the market that covers different size fixture holes in an...
View ArticleClik here to view.
BabyForm2: 3D Print Your 3D Printer
@Richard_Kagerer wrote: These little guys were a hit at the FUSE user conference. I didn't bring enough for everyone, so I'm posting my work here for anyone to make! You'll need: Model Files here's...
View ArticleDental Printing Service
@djsilver wrote: Hi, Does anyone know of a company (i.e. rapid prototyping manufacturer, dentistry service company,...) that can print using the Dental SG resin (or another autoclaveable and...
View ArticleForm 1+ Amber Lid
@jprochnow wrote: Does anyone have a broken printer that has a lid in good shape with no cracks? Mine has developed big cracks and I would like to replace it but formlabs doesn't carry the lid...
View ArticleClik here to view.
Using Envisiontec Photosilver RCP130 on Formlabs2 (superior part detail)
@industrialforms wrote: Dear all I have currently Form 2 machine and have project where I am trying to design part with superior detail. I tried to use grey, but this material is too brittle and...
View ArticleForm 2 Sale TX
@kaptiv wrote: Hey guys, selling my lightly used Form 2. It comes with original box and 2 trays. I also have extended warranty through my card, that extends the manufacturers by a year. Ill throw in a...
View ArticleClik here to view.
Need your experience in my first print
@Komy wrote: I just got Form 2 printer, had no time to waste so I started to print small key chain. At the beginning there was error with some sensor problem, on forum and support I found out that I...
View ArticleClik here to view.
Remove Raft Under Empty Space
@Industriald wrote: Hello friends, I have a form 2, it is amazing. I ran into a software issue recently when printing a large thin ring. It needs to be printed flat due to both inside and out being...
View ArticleSwappin Resins
@grogbro wrote: I have a tank with grey resin in it. And I have the plastic container, hooked into my Form2, thats 80% full. Whats the best way to get them out of the Form2 nice and clean, especially...
View ArticleSecond hand sunlight
@jrstudioboss wrote: I just pulled a couple prints from the printer and noticed some oddly cured blotches on the surface of one of them, and it was the side of the printer facing the window and the...
View ArticleClik here to view.
Form1+ Print issues
@droidmahn wrote: So I bought a Form1+ off of a friend but I cant seem to make it print correctly. He stopped using it after the form2 came out but he had no issues up until then. I'm using Formlabs...
View ArticleNew Customer needs help with project estimates
@marona wrote: Hi, first I will introduce myself. I work for a software company who is developing a new application that use some hardware for logistics ( Raspberry PI, 7'' lcd screen ).The main idea...
View ArticleWiper arm movement
@Imagedental wrote: Hi, my wiper arm doesn't always move the full way across the tank, is this normal? it will move a little bit then sometimes fully across. thanks Posts: 4 Participants: 2 Read full...
View ArticleWhat to do with leftover material in Resin Tank
@mnair7 wrote: I just printed my very first print using the Form 2 printer. I have leftover material from the print that is sitting in the resin tank. Is there a recommended step on what to do with...
View Article