Microwave cure box
@mceiver wrote: After reading some of the other posts, I decided to take a stab at building a cure box.Goodwill supplied a microwave with turntable. Purchased 20W UV light from Amazon, and a small...
View ArticlePainting or Dyeing Flexible Resin
@Dudemeister wrote: I have a just finished printing some bellows using Flexible v1. Is there a way to die this or paint it so that it doesn't crack when flexing it? Posts: 1 Participants: 1 Read full...
View ArticleVariable print settings in "open mode"
@DanGador wrote: Hi,Every time I try to figure out the perfect settings to a new resin I need to print multiple parts in multiple different print settings in order to compare them. I would very much...
View ArticleUploading while printing
@Ken_Weiland wrote: Hi All,Probably a very basic question, but while I am printing a part, can I upload another without disturbing what is currently printing? Thanks,Ken Posts: 1 Participants: 1 Read...
View ArticleHeating taking too long?
@Imagedental wrote: Hi I just got a second printer, and this one takes for ever to heat the resin and will give the error that it hasn't reach temp. is this normal? or is it an issue? Posts: 1...
View ArticlePreForm cant repair/open this file
@brainglow wrote: Hi! I've got a pretty silly order, but was going to take a look at it anyway, the details was silly, so I've remeshed, reduced and made it solid in MeshMixer before exporting. Looks...
View ArticleModel Resin - bad clearance, Support is a nightmare!
@Dentalspezialist wrote: Hey all, I have horrible outcomes with the Model-Resin.We're using the Printer for Dental models, but the Models are always about 0.2mm to small so removable teeth never fit!...
View ArticleClik here to view.
Failures, file, machine or operator error?
@JasonSpiller wrote: I've tried to print this file 3 times now, varying orientations and support settings, the platform prints just fine everytime but then nothing adheres to the supports. I'm...
View ArticleForm 1+ for sale (OH)
@Jason_Fraser wrote: Hello,I am selling my lightly used Form 1 +. I have just installed brand new mirrors in it and I have 2 build platforms. I also have the cleaning kit minus the vats. I may get new...
View ArticleClik here to view.
Lancer Pen Holder!
@Marcologue wrote: Here's a project I made recently! Here it is sanded and primed... final_primed2.jpg1500x1875 411 KB final_primed1.jpg1500x1875 481 KB final_primed4.jpg1500x1875 432 KB...
View ArticleClik here to view.
Ugha, rensors
@grogbro wrote: I got a new tank and a 'new' black or what I thought was new and its V2 and not V3 which is really annoying. I took out my old tank and stored it away with resin in it, covered. I put...
View ArticleNorthern Colorado 3D Printer Meetup
@Paul_Hollingshead wrote: Saw an announcement for a new affinity group. https://www.meetup.com/Northern-Colorado-3D-Printing-Meetup/ I don't believe that they have had any meetings yet, so can't offer...
View ArticleWhat are the resins that really require UV CURING?
@goujonrichard wrote: Hello I was looking at the resins list on formlabs.com and realized that not allcthe resins require UV curing!?What are the resins that really need UV CURING beside the castable...
View ArticleFS: Form 1+ with extras!
@Annino wrote: The time has come to part with my Form 1+ (With silver housing). I have grown my business and learned that my customer base primarily demands inexpensive, durable parts. This is...
View ArticleBlack Resin V2 and V3
@goujonrichard wrote: I bought not long ago the Black resin V2 and I'm runnng out. It seems the V2 is not available anymore(?) is that true? if it is the case, can I mix the rest of my V2 with a V3...
View ArticleDielectric Breakdown Strength of select Form2 Materials
@shannonjd wrote: Recent progress in a variety of 3-D printing technologies that include various materials and much improved layer refinements have led to novel capabilities in rapid prototyping. We...
View ArticleDental invisible aligners
@Komy wrote: Ok guys I need help on this, I have 3d model of teeth, I need invisible aligner. Is there a resin to directly print aligner, or you print positive and then put invisible aligner negative...
View ArticleClik here to view.
Satılık form 2
@esta wrote: 19598867_1523907074321043_1750507465910912161_n.jpg720x960 44.5 KB 19598625_1523907077654376_4045312040074347817_n.jpg720x960 39.3 KB satılık form 2 temiz ihtiyaçtan satılık Posts: 1...
View ArticleClik here to view.
Satılık form labs form 2
@esta wrote: 19598625_1523907077654376_4045312040074347817_n.jpg720x960 39.3 KB 19598867_1523907074321043_1750507465910912161_n.jpg720x960 44.5 KB Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Maximum sized print and minimum feature size
@Axel wrote: Hi Form community, I want to share an experience with you guys out there and want to ask two very specific questions. For those not interested in the experience, here are the questions:1)...
View Article