Clik here to view.
Failed print stuck to the bottom of the tank
@wertless wrote: I had my first failed print. It fell off the build platform and now I have a piece stuck to the bottom of the tank. The printer did not stop but kept running til the end. Can I get it...
View ArticleTransporting Print before Finishing process
@mnair7 wrote: I currently have the printer I am using in a location about 20 mins away from my office. If I want to do the finishing procedures, would it be possible to keep my print in a plastic bag...
View ArticleClik here to view.
Türkiyeden satılık form 2 estasilver1453@gmail.com
@esta wrote: 19598625_1523907077654376_4045312040074347817_n.jpg720x960 39.3 KB 19598867_1523907074321043_1750507465910912161_n.jpg720x960 44.5 KB Posts: 1 Participants: 1 Read full topic
View ArticleDashboard
@creatr wrote: Hello there,We use multiple Form 2 printer to do production.The dashboard is cool to montior some things but we need to monitor also how much resin each tank has printed.I know we can...
View ArticleDICOM to STL or OBJ
@Komy wrote: I have this dental format from some CT scanner, how to convert it to printable format or at least format that I can open as point cloud or something similar in 3D programs? Posts: 2...
View ArticleLayer line at support connection?
@elevatorglass wrote: Hello everyone! Any idea as to why I get a heavy layer line right at where the support connects through my entire piece ? It seems like preform is making an error when adding...
View ArticleFormlabs in Italia!
@creatr wrote: Apro questo topic per tutti gli Italiani che hanno preso la fantastica Formlabs Form 2!Fatevi sentire e dite come usate la vostra Form 2?Chi ha stampato il modello più spettacolare?...
View ArticleLow Resin Cartridge
@Marcologue wrote: Dump question here: When the Form2 print says it's low on resin, does it mean the cartridge is empty and only the resin in the resin tank is left, or does it mean there is still...
View ArticleClik here to view.
Printing hollowed model
@spms_jomar wrote: Just want to ask for advise on how to print this one. I'm trying to print a model with hollowed base. see pictures below. Any advise? 1.png1119x669 105 KB 2.png1047x681 130 KB...
View ArticleClik here to view.
Grey V3 Frothing (many, many bubbles) in the resin tank
@beaveren wrote: Hello I have noticed with the new Grey V3 resin that I am getting a great amount of bubbles on the surface that do not dissipate as other resins have. Is this normal for the newer...
View ArticleCast jewels with blue resin problem
@tomergold wrote: Hello everyone,Here is my problem.I am a jeweler and I use a formlab Form2, resine blue castable.When I print engraved pieces with text (example: medal, alliance), and cast, the...
View ArticleClik here to view.
The Form1 Print Problem
@Law_Gui_Wa wrote: Hello, I got the Form 1 Not Form 1+Yes ,is a Old machine .But is new.Just open boxI try to print the circle round partsBut print out is not circle. Like a ellipse.......
View ArticleAngled gap between platform and tank
@MattiaMercante wrote: Hello,from some months my Form1+ is affected by a strange problem: the plane of the building plane isn't parallel to the bottom of the resin tank. When prints starts I can see a...
View ArticleUsage of IPA
@yashyadav199 wrote: My question is regarding the usage of IPA. I have seen some of the people submerging their printed objects in IPA before UV curing it and there are some who do not use IPA at all....
View ArticleRe: Painting Tough Resin. part 2
@don_vukovic wrote: The last time this question was asked no one had painted a tough resin part and was satisfied with the results. Is painting on tough resin a bad idea ? Don Posts: 3 Participants: 2...
View ArticleClik here to view.
My printer is destroying a piece of small lumps on the creature
@poping2 wrote: Why is this happening? I want to know why. Small powders zggggzgzgd.JPG1213x959 40.8 KB xhhh.JPG1432x975 55 KB KakaoTalk_20170704_091719538.jpg540x960 73.3 KB and demolition of the...
View ArticleIt's normal than the resin "suction" the building platform?
@SFernandez wrote: Hi guys,I'm printing without any problem, well, just have to Z axys to -.30 in the new resin tank to let the resin stick in the platform, but I think is normal right?But I saw that...
View ArticleClik here to view.
As a prop maker, this thing feels like cheating
@andyfilms wrote: .,,and I love it! Printed this guy overnight, assembled, painted, and electronics done in just a few hours. This is going to open so many possibilities! thingiverse.com Thermal...
View ArticleSupport editing/unable to place support at location
@RenkFasze wrote: Hi all, having an issue with files that import to Preform without any errors being reported. After I begin support editing/fine tuning after the automatic generation I am given...
View ArticleClik here to view.
New Form 2, dust on main mirror
@Braddock wrote: Hi guys, I just received my Form 2 a few days ago. I haven't used it yet, just unpacked it. I was checking it all out with a torch, and was alarmed to see dust on the main mirror,...
View Article