The Future of the Form 1+
@Frew wrote: After three years on the market, the Form 1+ is sold out and no new units will be produced. The Form 1+ enabled a generation of creators to make things like new medical devices and stop...
View ArticleClik here to view.
Reducing the size of the Preform Base
@thowe26 wrote: I am about to print a large threaded disc with a hollow centre..My prefered orientation is as per the attached image but it uses a huge amount of resin in the centre of the disc where...
View ArticleForm 2 does not recognize resin tanks
@u32071924 wrote: Hi, since yesterday the printer form 2, does not recognize resin tanks, no color. I have tried with all the different colors, but none of them recognizes it.Anyone know the solution?...
View ArticleClik here to view.
Resin tank failure!
@goujonrichard wrote: Hello everybodyI tried to print a project with the grey V2, and after 3 hours I noticed severe failure in the print. I cancelled the print and had to clean the debris from the...
View ArticleCasting issues
@ptims wrote: I've tried to cast the castable resin 4 times now with NO usable results. It appears the burnout isn't complete.The resin is cured (after 24 hours in a fingernail salon light box, the...
View ArticleClik here to view.
100% print failures. Nothing will stick to build platform
@Gerard_Alcini wrote: Hi, I could really use some pointers here. I've had my form1 + for 2.5 years with overall very good results but suddenly the prints are now failing every time, even on jobs I've...
View ArticleEnd-To-End Digital Dentistry: New Materials, Applications, and Integrations
@Frew wrote: The dental industry is especially suited for 3D printing with each set of teeth being unique. One year ago, we released our first dental material, DentalSG, and today we’re excited to...
View ArticleClik here to view.
Jewelery holder
@rodrigo_antonio wrote: I still do not understand why Formlabs is not able to support these diameters, the support created in the Formlabs program and very rude to the jewelry at the time of removal...
View ArticleClik here to view.
Video on 3D Printing with help from the guys at MatterHackers
@BJBenterprises wrote: Hope this isn't taken as spam or anything, just sharing as a General Discussion of 3D Printing which I'm sure a lot of you already know. This is geared more for newcomers to the...
View ArticleNew preform not opening files with accent
@Leonardo_Tuorto wrote: Hi! I updated my preform today to 2.11 and I noticed that it isn't opening files with accents (ç, á, ã, ...), also it doesn't work if the file path to the file have any accent....
View ArticleBasic CAD - Geometry questions
@kevinduhe wrote: A lot of you know I am not a CAD designer and new to 3D printing. I have some relatively simple geometry/CAD questions I'd like to take to private message. Anyone willing to spend 10...
View ArticleLooking for a Form 1+ user in the bay area
@ROBERT_MARTINEZ wrote: Looking for a Form 1+ user in the bay area. It would be nice to compare notes. I could really use more successful growing.The help in discussion I seek is in a jewelry...
View ArticleClik here to view.
Optimizing prints:
@David_Boydston wrote: Hi Guys, I just got my printer this monday, I've been playing around with various settings trying to learn how to optimize my prints, just as an FYI if you havent learned some...
View ArticleKeycap - warping/skewing
@Pancakes wrote: For reference, this occurs on both the form 1+ and the form 2. I'm trying to print a keycap for a mechanical keyboard. I really feel like this should be a cakewalk for the form 1+/2...
View ArticleForm 1 (non plus) issues
@Fa89bihb wrote: Hey, i´m fabian from germany. I bought a second hand Form 1 (non plus) and have some issues. How is it possible to use other Resin manufacturer ? Open mode ? Black Formlabs resin...
View ArticleLattice Cube for Full Form 2 Build Volume?
@chris_ell wrote: Does anyone out there have, or know where to get, a lattice cube that is the full build volume of a Form 2 without supports? I'm starting a 3D printing club at work and wanted it as...
View ArticleLaser offset settings?
@Mimo wrote: I noticed that in most cases the parts came out too big. usually it is around 0,1mm - 0,2mm. I know that we have a setting for x and y in the printer menu, but this just stretches the...
View ArticlePart fractures
@bikeman wrote: The past few prints have fractures in the part. What is going on. I have run all most 2 liters through the machine at this point with really no maintenance. Is there some maintenance I...
View ArticleClik here to view.
Just backed this, looks interesting!
@Will_Howden wrote: kickstarter.com Milkshake3D - The Artist's 3D Printer.From jewel to 11" fig. Large SLA top down 3D printing, highest stability, fast and high resolution. Web control on all os...
View ArticleBlack or grey resin? Why?
@Ing3nia wrote: I want to buy another resin for my Form 1+ but i want to know what it's better, I will print detailed models and need best quality and least waste of resin. Cheers! Posts: 1...
View Article