Is it impossible to cast recessed text?
@PoundersJewelry wrote: I've been trying for almost 6 month to cast recessed text on 2 different models. I've reduced the depth of the letter to .3mm and still had issues with casting. The body of the...
View ArticleWANTED: Your nearly expired resin
@Dudemeister wrote: Looking for nearly expired resin. If you have any excess inventory of resin that is about to expire or has just expired, I'm interested in buying some of it. Please PM me with info...
View ArticleClik here to view.
Newb monster... this thing is a blast!
@AlexMcCarley wrote: In my normal manner, go ahead and try something...and as an engineer, break stuff. DSC_0203.JPG1280x720 683 KB DSC_0205.JPG720x1280 420 KB So, Millennium Falcon was obvious,...
View ArticleFlexible resin default printing parameters (custom material)
@esulli13 wrote: Hi all. I'm trying to tweak some printing parameters using the OpenFL version of Preform (https://github.com/Formlabs/OpenFL) to print using a custom material. Since the custom...
View ArticleResin Tank Care
@itrmdrc wrote: General Question: Is it better to leave the resin in the tank for long periods or put it filtered into a opaque jar with lid? We go through stages of a lot to print or nothing at all....
View ArticleAbout to pull the trigger
@Nixie wrote: I've looked around and I'm pretty sure the form 2 is the machine for me, but I just had a few questions to get off my chest first. Which resin is best for detailed sculptural models?...
View ArticlePreForm annoyances (material selection and color)
@fantasy2 wrote: Couldn't find any topic about the annoyance I have so opened a new one. Material selectionWhen I open PreForm, it asks me which resin I want to use to make a new 3D print. Great! But...
View ArticleClik here to view.
Photocentric Resin BLACK Hard on Form1+
@computerflummi wrote: Dear´s, after some weeks of tuning and testing I would like to share my results with you: Setup Photocentric HARD Black UV Resin Form1+ Open FL with material card attached...
View ArticlePrinter Resetting on every print
@Spatula wrote: Currently our Form 2 is struggling to even start printing. At best it starts the first layer, and then immediately restarts itself and gives an error message on reboot saying it has...
View ArticleClik here to view.
Collecting container
@3dbruno wrote: Hello.Someone has tried to clean the collecting container? Resin Tank 4b.jpg800x941 268 KB The resin collection container must be removable for better cleaning. What do you think about...
View ArticleTough v3 dimensional accuracy
@Steven_Hines wrote: I've noticed that tough v3 seems to have difficulty maintaining dimensional accuracy of hollow spaces (e.g., slots for nuts, holes for screws, etc). The material appears to...
View ArticleForm Finish Kit
@SFernandez wrote: Hi everybody!! I have just buyed a second hand Form 1+ printer....and have a question about Form Finish Kit, the one I have here is a bit dirty...the boxes don't close...
View ArticleResin tank help
@grogbro wrote: I just received my Form2 and I can't seem to get my resin tank in. No matter how I align the legs they wont drop in so I can push the tank forward. Are they really this difficult to...
View ArticleMaker juice issues
@campingtomz wrote: So i was looking for a cheaper Resin for my form1+. since 150 per litter is out of my budget. so i picked up a litter of the black and 1/2 litter of the red from maker juice. this...
View ArticleXYZPrinting Resin in the Form 1+
@Dudemeister wrote: Has anyone tried the resin fro XYZPrinting? Their Nobel 1.0 SLA printer is similar in spec to the Form1, so I wonder if their resin would work in the Form1/1+. The price is...
View ArticleHow reset the resing tank assignement
@massimomassa wrote: I need explanation about the procedure to reset or by-pass the warning when i use a different resin. Posts: 3 Participants: 3 Read full topic
View ArticlePrinting Flat Models
@silvertek wrote: Hello, I have not purchased a Form2 printer yet, but am close to making a decision. If my model is a flat piece with no overhangs (think of something that could be easily created on...
View ArticleFailed print 1
@grogbro wrote: So my first print was a failed one even though all the supports seemed fine. no red etc. I came home and the bed was just laying in the resin and it only did 44 layers. Sweet... I...
View ArticleClik here to view.
Form 2 in Dentistry
@VAZONE wrote: Form2 is good enough for lot of Dental prints! If you have any questions, welcome! IMG_0145.JPG2048x957 240 KB IMG_0149.JPG720x480 36.3 KB Posts: 10 Participants: 3 Read full topic
View ArticleSelling Castable 1 Cartridge
@R041 wrote: Only printed a few, 0.961L remaining. I'll sell it for half of it's current price, I'm in Seattle WA. Posts: 1 Participants: 1 Read full topic
View Article