Clik here to view.
Form2 Z-Axis stop moving
@catt wrote: Have the F2 for about 5 months, successfully printed many prints. We were very happy with the printer and overall exceptional quality of the coming prints. Just today the build platform Z...
View ArticleClik here to view.
Resin Tank Fail and Disaster, Again
@NFan wrote: While printing today, I got a few times the message "Print interrupted" in my mail. So I check what is going on with the printer and this is what I see on the screen....
View ArticleHelp with Error Code 23
@Aaron_Arndt wrote: Hello! Need a little help. My Form2 performed really good for the first few weeks but now I'm getting Error code 23 allot. Have any of you experienced this and how do I correct it....
View ArticleClik here to view.
First prints!
@arthurr43 wrote: First prints with form2. Printing another set today. I wanted to see how different angles would affect the detail in the pictures. The horizontal disk was the worst of the 3. Letters...
View ArticleClik here to view.
Engrave Fill – UV Cure Nail Polish
@lukepighetti wrote: http://www.sallybeauty.com/fingerpaints-gel-polish/SBS-806330,default,pd.html I can get this locally for $10. It wipes off with alcohol and cures in about 60 seconds. The...
View ArticleLayer height windows
@lukepighetti wrote: I'd like to print 100 micron for low detail portions and 25 micron for high detail portions. I have a part that prints very well at 100 micron except it has a logo which prints...
View ArticlePrint on bed
@lukepighetti wrote: The ability to turn off first 5mm layer bloat would be nice. Posts: 4 Participants: 3 Read full topic
View ArticleNew Mold Tutorial: Formlabs Form2 Pattern for Silicone Molds
@BJBenterprises wrote: Hi there, my first post here in the Forum. I wanted to share our new Mold-Making Tutorial Video featuring the Form 2 Printer.Watch how to turn high quality SLA 3D Prints into...
View ArticleHow to secure metal micro bearings to 3D printed housing
@janakagoon wrote: Hi, I need to secure micro-bearings to a 3D printed housing. The bearings are small:Material: SteelInner Diameter: 4mmOuter Diameter: 8mmThickness: 3mm I am wondering if there is...
View ArticleClik here to view.
Print a Ball & Socket joint as one piece
@Dudemeister wrote: I'm tring to print a nall joint in one pass, yet still have the parts movable. I'm printing a model of a mech, which has a ball & socket hip joint (see image below). The...
View ArticleForm2 Shipping list
@grogbro wrote: I recently received a shipping list email saying that my Form2 had been shipped. What concerns me is that there is no mention of the 1ltr Grey Resin. I am hoping that the resin is...
View ArticleClik here to view.
Scaffolding misshapen
@Francsico_Navar wrote: Hello, i have a problem with my from +1 At first it seemed like the mirrors but I already clean them but now it seems that it affectedscaffolding, I do not know if it's the...
View ArticleLack of detail around supports in castable resin
@kkingcgi wrote: I'm cleaning up some prints done in castable resin and I've noticed that the detail is not so sharp on the sides where the supports were. I have been going with the philosophy that...
View ArticleClik here to view.
UV Cure Chamber Design - Dimensions and Pics
@BJBenterprises wrote: I thought I would upload some pics and measurements for the simple UV curing chamber we built around the Salon Edge Nail Curing Station and rotating table shown in Formlabs...
View Article(VANCOUVER) Form 1+ for sale $1600 CAD + Shipping
@Joshua_Solomon wrote: I bought this factory refurbished Form 1+ in August 2015 and am now selling it to make room for my Form 2.It has been a wonderful and reliable printer and is in excellent...
View ArticleNeed help printing tiny gears
@Openforge wrote: Hi folks,I am struggling to print 3 different gears and i was wondering if you guys could give me some advice (Angle, Layer thickness etc..) Right now i'm trying to print those gears...
View ArticleAnnouncing new materials, a user story, and Form X; a home for tinkerers
@Frew wrote: We’ve got quite a few exciting things to launch today so let’s dive in with an exciting re-formulation of our Grey Resin. Grey V3Grey Resin has been updated with a matte, opaque finish...
View ArticleWelcome to the Experimental Category - Introduction and Guidelines
@Frew wrote: This category is a home for all of those experimental projects that push the boundaries of what’s possible with Formlabs’ printers. You’ll notice that we migrated threads from other...
View ArticleHow to get the best aesthetic results on all sides of a print?
@Joel wrote: There are photos of parts created with the Formlabs printers that give the appearance that they look great on all sides of the part. For example, the photos that Formlabs posts of the...
View ArticleNextdent
@Smilelign wrote: Hey has anyone got any experience with using the resins from this company? http://nextdent.com/ Currently having "mixed" results and wondered if anyone else has any thoughts. Posts:...
View Article