Clear Tough Resin
@SonKim wrote: Not sure if this is even doable, but a clear tough resin would be useful. Posts: 1 Participants: 1 Read full topic
View ArticleRSS Feed only showing the header
@thowe26 wrote: I have recently add the Formlabs rss feed to my news accounts in Thunderbird..I get to see when a comment is made within in relevant discussion/topic because I get a msg.That msg...
View ArticleClik here to view.
Trimming hard to reach support contact points
@KevinHolmes wrote: Hi All, I print a lot of parts with supports into concave areas, and the parts are always masters for moulds, so cleaning support contact points for better surface finish is...
View ArticleClik here to view.
Custom Injection Molding Prototypes
@Pacificimc wrote: Happy Holidays and hope 2017 is a Great One !! We are a small custom Injection molding company at has provided 3D printed models for the past four years.This month we have built a...
View ArticleUltrasonic & Ultraviolet Cure
@lukepighetti wrote: Anyone here have experience running ultrasonic cleaning and ultraviolet cure simultaneously? Posts: 1 Participants: 1 Read full topic
View ArticleForm 1+ didn't return to Z-home after print
@lukepighetti wrote: Running PreForm 2.9.1 and 1.44 Form 1+ for the first time, after the print was completed the bed didn't return to top-most height. I have not had this problem with OpenFL 2.3.3....
View ArticleClik here to view.
Creating Labels, logos, and text on parts
@SchemeInc wrote: So the numbering and hash marks are modeled into the part, and a layer of paint blotted in, and allowed to dry... then sand. This was a test on a bad part, that was already sanded...
View ArticlePrint Time Accuracy
@rclaborne wrote: Am I the only one that notices that PreForm is pretty bad at calculating the print time for a build for the Form2 but pretty good at calculating it for the Form1+ ? Form2 calculation...
View ArticleEngine build platform micro block on print
@TAndrew wrote: Hi all. I have this problem (I do not know if it is really a problem).During the ascent/descent of the build platform during print i have a "micro blocks"? It also happens to you? Hi...
View ArticleClik here to view.
Printable Hardware and Software Manual
@VanTechniek wrote: I am looking for a printable (not 3D print ) version of the hardware and software manual. I do not have the original documentation that came with the printers and while the online...
View ArticleMissing Resin Tank with two separate tank tries
@mikebonanno wrote: Hey Everyone, I have been getting the missing resin tank warning now for over a week. I tried a new tank and it worked for a short time, but I am now getting it again. Anyone find...
View ArticleGummy prints
@campingtomz wrote: Hey guys i am having some issues with my prints. I am new to resin printing and i just got my form1 + to print decently yay me. basiclly my prints are coming out gummy or just not...
View Article(OTTAWA) Brand new Form 1+ for sale $1800
@Openforge wrote: Hi mates, We have recently bought 2 Formlabs Form 1+ 3D printer at an auction (Canadian Seized Property) but we only needed 1 of them. The second Form 1+ Kit has never been opened...
View ArticleClik here to view.
Latest Preform software update
@Devin1 wrote: Hello Formlabs team, Wanted to bring you up to date with some of the problems I have been encountering. First of all, it feels like the latest updates has gotten worse at finding areas...
View ArticleClik here to view.
Build of AtlasBrace's IKEA UV Chamber
@3DTOPO wrote: I made a build based on @AtlasBrace's excellent IKEA Cure Box. I installed a total of 12 bulbs instead of @AtlasBrace's 8 bulbs for a total of 108 watts of UV light. I substituted the...
View ArticlePrint directly on the build surface but still have supports
@Dudemeister wrote: Is there a way to print a part directly on the build platform, yet still have Preform generate supports only for the overhangs that need it. I know there will be some compression...
View ArticleHeating and wiper funktion
@Andreas wrote: Why is the wiper and heating funktion disabled for the open mode in the last firmware? This was a great feature before the new firmware comes out. I use 3rd Party resins very often....
View ArticlePCB Manufacturing
@cpommer wrote: Dear Ladys and Gentlemen, i have an easy addition for the Form 1 and 2 that would expand its usability to a new area. The Form 1 and 2 both have high precision uv laser and mirror...
View ArticleTolerance
@inventor wrote: Precision and tolerance of a formlabs 2 I did not seem to find anything about "Precision and tolerance" in manuel of the FL2.Is there is anyone who knows anything about it? i can see...
View ArticleResin tank idea
@campingtomz wrote: I have a form 1+, with the resin tank it only has a limited number of prints before you have to replace it(waste of money in my opinion) but what can you do, In the form labs...
View Article