Clik here to view.
Unsuccessful castable resin results using investment casting
@kdec wrote: Just like to share my experiences working with my investment casting house. So far I haven't been able to produce any results using the castable resin. I don't own a Form2 machine, so...
View ArticlePolishing castable resin
@digitalDougie wrote: Is anyone polishing their prints before casting and/or coating them with anything? Posts: 1 Participants: 1 Read full topic
View Article802.1x supplicant
@datasmasher wrote: Does anyone know if the imbedded computer supports 802.1x authentication? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Resin Overflow Puke Can
@billiejean wrote: I have my printer for 10 days and now I have to send it back for repairs for a simple design flaw. While doing a 9 hour unattended print The rubber stopper on the Resin Cartridge...
View ArticlePrint Services available. Form 2 located in the UK
@Joe90 wrote: Print Services available. Form 2 located in the UKDo you want something printed on the Form 2?If so, I may just be able to help you out. Please contact me for further information. Posts:...
View ArticleClik here to view.
Understanding PreForm FRONT and HINGE, hope this helps explain it :)
@RodMaxwell wrote: I see that people have had trouble visualizing the Hinge and Front of unit in PreForm. I hope this helps:) Tank Hinge Orientation looking up at BuildPlatform.jpg1212x867 147 KB Tank...
View ArticleWaiting for tank to fill
@Randy_Cohen wrote: So my Tough 01 cartridge is finally empty. But there's still a nearly-to-the-fill-line load of resin in the tank. All I have now is Tough 02, and I don't want to mix. But I do want...
View ArticleForm 2 for sale Germantown, Maryland
@cpoint2000 wrote: I would like to sell my Form labs Form 2 printer with 2 x Resin + extra tray, that is in excellent shape. Includes gray and clear resin (not sure how much left in container as it...
View ArticleSelect Hidden Wi-Fi Network, Link to Download Firmware, etc
@flcinnovation wrote: Fired up the Form 2 yesterday, set up a first print, and noted the results here: http://www.flcinnovation.org/form-2-first-print-a-mixed-success/ Suggestions: Create interface to...
View ArticleClik here to view.
Crust in Resin Tank
@Gianni wrote: can anyone tell me why in the Resin Tank forms a crust? Does it depend on the temperature? What can I do to prevent?The tank is 15 hours old, clean and transparent. the White Resin new...
View ArticleClik here to view.
My first large print
@jcrdesign wrote: Hello fellow printers,I thought I'd share my latest Form 2 creation 16hrs print time 150ml hollow. IMG_0655.JPG2448x3264 1.39 MB Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Can't print: error code 9001
@3DTOPO wrote: OK so I finally received my Form 2 today. I am trying to send my first print. After several attempts (each taking over 20 minutes) of generating supports I got it to work without...
View ArticleClik here to view.
Resin tank not recognized!
@3DTOPO wrote: Well I guess if its not one thing, its another tying to get my first print running. Trying a simpler print that was accepted, but now it tells me the resin tank doesn't match although...
View ArticleFailed print with build platform stuck in resin tank
@inkmonkey wrote: My first 2 prints were perfect. Put on a long one today (19 hour) and I went to check on it after a few hours and the printer had stopped. It showed as cancelled if I scrolled...
View ArticleStrange noise duing a large print
@gregor616 wrote: I am printing the first large piece since I got my replacement printer. I noticed about 4 hours into the 16 hour print I was hearing a thumping noise. So this morning now 12 hours...
View ArticleClik here to view.
No .stl option!
@timothykao wrote: For some reason, there is no other options for me to save the file type. All it is showing me are the .3dm file types. I am using Gemvison Matrix 6.0 and I have another computer...
View ArticleClik here to view.
First print: failed
@3DTOPO wrote: Well it got off to a good start, but the whole back top of the skull didn't print. I guess my first lesson is I can't trust the automatic supports which was one of the primary reasons I...
View ArticleInjecting tough resin in flexible prints? And other questions from a newbie
@Djmars wrote: Hi all,About to order form 2 and have a couple of questions see if anyone else had tried. So first up imagine a bat wing with small hollow channels where bones would be, pockets inside...
View ArticleClik here to view.
Printing protein ribbon-structures on the Form 1+
@Dow214 wrote: Before you read, note that I have not yet successfully printed a protein's ribbon-structure on our lab's Form 1+ machine. I'm asking for help in getting this working. Thanks in advance...
View ArticleNew Build Platform for sale (Form1/1+) - $85 shipped
@ZVat_Industries wrote: I have a new-in-box build platform for the Form1/1+. $85 including shipping gets it (retail cost is $99 plus shipping). Message me to arrange. Thanks! Zak Posts: 1...
View Article