Using one tray for multiple resins - how much 'wrong' resin mixing into the...
@proileri wrote: Hi, We have a lab where we sometimes need to re-use the same tray for different resins. We usually scrape the tray and give it a quick IPA wipe to be sure, but we are wondering if too...
View ArticleMy sincere apologies
@AlexMcCarley wrote: To my valued clients, I sincerely apologize that my new Form2 arrived way quicker than expected. This will result in a delay for your deadlines that I will now be completely...
View ArticleResin Colors!
@areffelt wrote: The biggest criticism I have received so far about this printer is that it only prints "standard" resins in black, grey, and clear. Color would be helpful in terms of organization,...
View ArticleSome round parts coming out slightly oval
@Michael_Weneck wrote: Hello,I am having some problems getting consistent print results. The parts I am printing are round with cutouts and passages to allow other parts to be installed. The parts are...
View ArticleYellow Magic 7 - now available from Z-Vat Industries
@ZVat_Industries wrote: Greetings Good Folk of the Forum, I'm happy to share that Z-Vat industries is now an authorized distributer of "Yellow Magic 7", the non-hazardous, non-toxic alternative to...
View ArticleDetecting a failed print early
@shekshishekki wrote: I've recently been having some weird issues with my parts sticking to the PDMS layer. Which equates to the part being stuck and the prints continue on. I checked on my print 8...
View ArticleClik here to view.
Better orientation interface in PreForm
@katkramer wrote: I was just watching a YouTube video on how another program helps the user orient the model before generating supports. I think the program is called Cura. I have great difficulty...
View ArticleLatest Preform and FIrmware with Form1+?
@Mitch_Gates wrote: I'm currently running PreForm 1.9 and Firmware 1.4 on my Form1+ and wondering if it's wise to update to the latest versions. I know a LOT of improvements were done specifically for...
View ArticleClik here to view.
Where to put the printer - how messy will it get?
@toecutter wrote: How messy does it get around your printer? As I set up my new studio, I'm thinking about putting mine at the far end of my desk. I have just enough room for it to be comfortably out...
View ArticleHow can I clean the resin in the sink
@shenliy wrote: Hey guys, After using Formlab a few months I found out that my sink very dirty because of the printing residue. I did not dump resin in the sink. I usually just wash the printing parts...
View ArticleHow to edit Supports
@Ken_Weiland wrote: I've had my Form 2 for about 5 months and using almost every day with great success on my projects, but what I need help with is editing those supports. Many times I let the...
View ArticleDesk wobble - Will that unlevel the printer
@toecutter wrote: Hey all, I'm setting up my printer to sit at the left of my standing desk. I have just got it level. However, I notice that the errant bump or jostle of my relatively stable desk...
View ArticleClik here to view.
Lock Wiper (Form 2 Set-up)
@toecutter wrote: Hi, In setting up my Form 2, I am unsure as to how to properly lock the wiper. Does the slotin the wiper mount have to slide onto the notch on the arm? See pic below. It is a touch...
View ArticleClik here to view.
Why i cant use the supports from the form 2?
@Jose_Nicolas_Carriza wrote: I would like to use the supports from the form 2 in the form 1 +, is there any way? supportform1.JPG687x921 77.7 KB supportform2.JPG716x936 88.1 KB Posts: 2 Participants:...
View ArticleResin tank double filled
@selena wrote: I just received my Form 2 and while the resin was filling for the first print, I got a cartridge empty error. I checked the cap was clear and clicked 'Try again' which I thought did the...
View ArticleForm2 vs. Form1 Tank Life
@Randy_Cohen wrote: Wow. I've put about two dozen prints across my Form2 now. Mostly medium sized objects, but a few that occupied the entire build platform. All with Tough V01 resin. About 1/3rd of a...
View ArticleManual replacement and calibration of form 1+ Galvanometers
@Stuart wrote: Hi, I have a broken y axis galvo on my form 1+ and I am looking at a $800 USD fee for replacing the galvo as my warranty has run out. If anyone has any idea on how to manually replace...
View ArticleGot My Form 2!
@pmcgarr wrote: Yay, I got my Form 2 Friday, just before the long weekend. It's sitting there collecting dust because I didn't get any resin. I ordered gray resin along with my form 2 and the shipment...
View ArticleNeed empty cartridge alert via SMS & email
@Emiliogarcia wrote: My Form2 paused yesterday because of empty cartridge, so about 10 hours lost... Would be great if you guys configure a new sms/email alert of "empty cartridge". At least please...
View ArticleDid the tough resin's color change?
@christopheVanBa wrote: Hello, I received tough resin from the european store and I test it today... is it normal that she's grey as the grey resin? Did she not supposed to be blue translucent? Thank...
View Article