PreForm uses 3DConnexion's 3D Mouse
@mizraith wrote: It would be nice if PreForm used 3DConnexion's mouse products for rotating the model. I see that others have requested this feature as well (but those topics appear closed). Posts: 2...
View ArticleTracking bad tank spots
@mizraith wrote: It would be great if preform gave us the ability to track bad tank spots. As bad spots grow over time, the tank is still useful, but one has to manually track (I use sharpie on the...
View ArticleClik here to view.
Crux Terminatus Inspired Warhammer 40k Cold Casted Prop
@JetBlaque wrote: Loving the imagery of Warhammer 40k, I decided to create something that could be seen in that universe. This is only my second print on my Form2 and I am loving it. I started the...
View ArticleMeasuring features within Preform
@ckhamken wrote: This would also be helpful in Preform just to double check that features such as holes are actually the desired size aside from just the overall size. I do realize that you could go...
View ArticleUV light box with Canadian shipping?
@backlash84 wrote: Currently I'm using a UV light box meant for gemmology work (I'm a gemmology student so it pulls double duty.) But as you can see, it uses 365nm instead of 405nm. I've been looking...
View ArticleError 29 help!
@Smilelign wrote: Has anyone ever had en error 29 message appear on their printer? It seems the printer starts to print but then the platform just go's back to the top and you get the error message....
View ArticleIs there anyway to disable support structures that start/end on the part in...
@armstrongc93 wrote: In Simplify3D, I can specify that supports can only be built if they start on the build plate. Is there a way to do something similar in PreForm, so that no support structures...
View ArticleDissolve the resin device
@PrinterCell wrote: Dear Everyone, Does anyone ever try to dissolve the resin device after making? Posts: 1 Participants: 1 Read full topic
View ArticleSimplify3d to Preform....stls don't work
@Tit_Inn_Des wrote: I am having issues loading STL's in preform, but they all work in SImplify3d.... Preform wants to perform a "repair"...then it doesn't load. Tried using netfabb to repair the...
View ArticleDuring print cartridges are not detected
@Amatique wrote: Hello. We have a Formlabs Form 2 printer, which worked quite perfect for roughly 2 months, but now we are facing a problem as the cartridges are not detected during the print process....
View ArticlePrinted moulds for injection moulding
@thowe26 wrote: I have a Form2 and a Travin TP2 desktop injection moulding machine.I had plans to print moulds and use them in the Travin.I have achieved the first part. Printing 2 and 3 part moulds...
View ArticleDo You Post Cure With Heat?
@jfishman wrote: From what I can tell from Formlabs documentation, there is a recommendation to post cure parts with heat. With Tough it's suggested 40 degrees C. I'm trying to find out if anyone...
View ArticleClik here to view.
Reconditioning a Form 1+ Resin Tray - Anyone else had any success?
@samfields wrote: I bought a second hand machine which was in a very poor state. The price was right, but the overall condition of the machine was pretty bad - resin everywhere, dirty mirrors, dust...
View ArticleKeep getting "Motors Jammed" message. No blockage, can't print anything
@acornboy wrote: Two days ago I started getting a "motors jammed" message and cannot print. I submitted a ticket yesterday, but have head nothing back at all. Is there a help number to call? I really...
View ArticleClik here to view.
Issue printing..... extra resin in spots
@arthurr43 wrote: Just printed this ring and have some extra inside the underbezel and on the side. Thoughts on what might be causing this? test1.jpg1280x960 154 KB test2.jpg1280x960 159 KB and my...
View ArticleProper disposal of isopropyl alcohol
@CaptainBisquick wrote: Where is the proper place to dispose of the isopropyl once it's turned completely murky? I've not seen any mention of this anywhere, which is quite concerning. How is nobody...
View ArticleKeep orientation: badly needed feature
@CaptainBisquick wrote: I just spent 10 minutes trying various orientations, getting everything just perfect. OOPS! I need to change one teeny tiny dimension by 0.03mm. Hooray! We get to calculate...
View ArticleClik here to view.
Form 2 printer resets all the time. Printing only 1 st layer
@AdrenalinLV wrote: Hi to all. We are using printer for 1 year. No we have problem, when print starts, platnform moves in resign tank and printer turns off and resets. we tried: 1. Factory reset2....
View ArticleNew grey is great on the form2 any talk of other colors and printers
@Colehammer wrote: We were blown away by the new grey resin. Has there been any talk of other resins getting the same treatment? Posts: 5 Participants: 2 Read full topic
View ArticleQuick connections
@UnitedBiologics wrote: Hello all, I am currently working on a project that requires a Small quick connection about 2-3 mm in size. The Resin I'm using with these prints is the standard, original, and...
View Article