Refractive Index of Clear resin
@duncanbourne wrote: Anyone know what Refractive Index the clear resin comes out to after curing? I was thinking of trying to print a lenticular lens, but it will be a bit variable while I'm guessing...
View ArticleYellow Magic vs IPA
@DerekMurphy wrote: I know switching to Yellow Magic has been talked about online in the past. I know that YM coagulates versus the IPA that dissolves the resin. When I use the YM as the first rinse...
View ArticleUse raspberry PI to control WS2813 LED
@alanwangwang wrote: I want to use Raspberry Pi to control WS2813 LED , If the code for WS2812B can work for it ?or need to use new code ? Posts: 1 Participants: 1 Read full topic
View ArticleBuild platform - suddenly the finished parts are REALLY, insanely hard to...
@ExileMachine wrote: Got my Form 2 a few weeks ago, been printing Black and Tough with great success. Really amazed at how easy the parts pop off the build platform after a print. I just wedge the...
View ArticleClik here to view.
Wedding Cake Topper
@R041 wrote: Printed and painted a 5 inch VW Convertable Buggy for my sister's wedding cake. The process was pretty simple, I tried to break everything down into as many manageable pieces as possible...
View ArticleBuild failing off platform
@3DTOPO wrote: I am using MakerJuice castable resin in open mode. My first build with it produced a part the full usable Z height and didn't fall off. Then I had another two builds that didn't fall...
View ArticleClik here to view.
Autoclaving Dental Resin
@sarvagyavaish wrote: Hi, We printed some parts using the dental resin on the Form2 and then autoclaved them. The parts developed some cracks as shown in the attached pictures. Has anyone had any luck...
View ArticleSub-Pixel Resolution
@Jose_Nicolas_Carriza wrote: Posts: 1 Participants: 1 Read full topic
View ArticleWhite V1 and V2 mix?
@timw wrote: I ordered a new cartridge of White last week, the day before V2 was announced, and unsurprisingly V2 arrived rather than V1. This is good, but I wanted to know if mixing the V2 with the...
View ArticleWiper motor jamming, resin over spilled outside the tray in automatic refill...
@norman wrote: need help, resin over spilled out of the tray on the formlabs 2 when the automatic refill tray option its on, now the wiper motor its jamming its not moving, i just cleaned the resin...
View ArticleXfab vs. Formlabs
@danjep wrote: When I decided to purchase the Form2, it was partly because of the fact that it is SLA instead of filament. The second was that it was reasonably priced as compared to the Xfab from...
View ArticleWhich resin is most durable
@dyb wrote: Hi,I want to print a series of rings using the actual resin as the end material. Does anyone know which resin (and printer) would be best for this. The rings have thin spikes on one side....
View ArticleControl Wiper Cycle
@3DTOPO wrote: I have been using open mode, and it seems to work so well without the wiper, that it would be very nice to be able to disable the wiper (in non-open mode) to significantly speed up...
View ArticleCan the resin materials be used as soling materials for footwear (wearable)?
@nate315 wrote: Would a 3D printed sole unit be suitable for attachment to a shoe and function the same in terms of flexibility, durability, etc as a conventional shoe sole? Posts: 1 Participants: 1...
View ArticleChanging tank resin designation?
@Will_Howden wrote: So I have two tanks that have had about 1 litre of resin through them. One clear and one black. I now have V3 of each but want to use the old tank which is V2, happy to discard to...
View ArticleWhat to do at end of resin cartridge
@Ken_Weiland wrote: I'm getting close to the end of my first cartridge. Will my form2 stop in the middle of a print, waiting for a new cartridge to be added? Or will I have wasted a long print job....
View ArticleHas anyone tried B9 Yellow Resin on Form 2?
@KBS756 wrote: Has anyone tried using B9 Yellow Resin on the Form2? It gives me phenomenal results on my Solus printer, significantly more consistent than the results that I get with Castable V2 on my...
View ArticleHow safe is the laser spot test?
@Edward_Peretti wrote: The Form 1 laser is pretty powerful. I attempted the laser test though got a little dizzy looking at the laser from a distance. I also didn't have the lid on as I watched a...
View ArticleClik here to view.
3D Printed Star Citizen Ships!
@Eldrake wrote: Heya folks! I'm new here, first post. My friend has a Form1+, so I buy him liters of the resin, do the model prep work in software, and he prints things for me. I'm a huge fan of the...
View ArticleClik here to view.
Bad print peel lines due to bad laser flare?
@Edward_Peretti wrote: Getting some bad peel distortions on my models, much worse since updating preform to the latest version. A few months back I had an old version of preform and using outdated...
View Article