Missing chip on resin cartridge
@tonberryhunter wrote: One of the new White resin cartridges I ordered is missing the little ID chip. How do I manually set the printer to see it as White Resin? You would think at 160 a pop you guys...
View ArticleClik here to view.
FORMWASH HydroMeter came today without an O-Ring
@ken wrote: My FormWash came today, after unboxing i realized the HydroMeter came without an O-Ring. Can I still use the wash? Or should I wait for a replacement? Posts: 5 Participants: 2 Read full...
View ArticleBase will stick to the plate, the rest wont?
@sharpknlfe wrote: What would cause the first few layers of the base to stick to the build platform, and the rest of the print to stay in the vat? Is it more of a support issue or would it be the...
View ArticlePetition for physical tools to be included in the package
@ken wrote: I’m having issues with a brand new Form 2 (less than a week old). Support is trying to help me. I need a 1.3mm hex as recommended in the procedure sent to me. The tools I bought so far...
View ArticleClik here to view.
How I repaired by Form 1+ with a second-hand part, some acetone, and a pack...
@Charles_McManus wrote: A little over a month ago, the unthinkable happened - my Form 1+ broke down. Long story, short - I bought a Form 2 to do my day-to-day business. However, I wasn’t keen to pay...
View ArticleHeating a DIY Curing Chamber?
@Chris_Estelow wrote: Has anyone added a heating element to their DIY curing chambers they have made? If so can you please show what you used? Thanks, Chris Posts: 2 Participants: 1 Read full topic
View Article"Printer's tank is missing"
@Digitalsmithy wrote: Hey all…again. I’ve been running into this error every single time I print something now. Doesn’t matter which tank I’m using I have to reinsert it about 20 times and cross my...
View ArticleClik here to view.
Emperor Scorpion sculpt @ Ro-Man Studios (wip). Will be printing next week
@romanstudios wrote: Scorpion_WIP6.jpg1120x840 241 KB Scorpion_WIP7.jpg1120x840 201 KB Sculpted in Zbrush by Richard Lafarga. Posts: 5 Participants: 4 Read full topic
View ArticleEmpty cartridge keeps trying to fill without letting to proceed
@pr3dato8 wrote: The Durable resin cartridge has run completely dry, but there is still plenty of resin in the tank. In the past when I would attempt to print Form2 would give a warning at the start...
View ArticlePreForm 2.15 continuous crashing
@Thomas_Anders wrote: Files I’ve had no problems printing before are causing PreForm to hard crash during the Printability check phase. So is there any way to switch back to 2.14 until 2.16 comes out...
View ArticleStrategies for 3D Printing Architectural Models
@Frew wrote: We recently published a new white paper on best practices for printing and assembling architectural models on Formlabs products. Use this thread to share architectural projects that...
View ArticlePrint a dogbone sample for standard tensile test of Tough FLTOTL02
@freezinflame wrote: Hello, Has anyone ever printed a dogbone sample for standard tensile test of Tough Tough FLTOTL02 using Form 1+? If yes, what are the dimensions of your sample? What are the...
View ArticleClik here to view.
Grainy line effect
@DavidGraham wrote: Hi has anyone any ideas what could cause the grainy pattern in the photo below printed in dental model resin. A5F35C74-5615-4B3E-A756-E385CE4B34D8.jpeg1512x2016 477 KB Posts: 1...
View ArticleDental Model Dies not fitting - TOO TIGHT?
@G17 wrote: Hi everyone, I’m printing out dental models along with sectioned dies. Lately, my dies have not been sitting in the models correctly. After cleaning and curing, it seems that the dies may...
View ArticlePause the printing and customize the platform's height
@nick8 wrote: i am a student and i am working on a project for my school. I want to pause the printing of a cylinder ( that consistes of 300 layers) every 50 layers and customize the platform’s...
View ArticleMix flgpbk03 and flgpbk04
@majo wrote: Hello, in my tank is the last flgpbk03 an now i got new flgpbk04. Can i just put den v4 Cadrige in and ignore the messages, so it will be mixed up in tank or are the v3 and v4 not...
View ArticleAntifoaming agent for new resins
@FredB wrote: Could we get an antifoaming agent for the new resins? I’ve had some issues where foam is getting on finished surfaces and leaving artifacts in the finish. Posts: 1 Participants: 1 Read...
View ArticleReservoir fisuré
@bernard1721 wrote: Bonjour à tous J’ai acheté une formlabs 1+ depuis 1 an. Mais voici mon problème, ayant pris 4 réservoirs de résine, pour mettre des résines différentes dans chaque réservoir....
View ArticleSqeeeeeek!
@CartoonCrazy wrote: My printer has developed a really loud squeak during each layer cycle. I believe it is in the plate lifting system. -I checked the wiper and it is not touching anything. -I...
View ArticleClik here to view.
Advice on print?
@MASSCollective wrote: I am about to begin printing this model (see attached photos) and it will be my longest (24 hours) and largest (4"x4"x5") print yet. It will be in Clear V4, brand new tank and...
View Article