Clik here to view.
Form 1/1+ MakerJuice SF resin (Black)
@Stetommy99 wrote: I'm development a profile for the new openfl for using the "MakerJuice SF for the Form 1/+/2 - 3D Printing Resin" because with FormLabs profile blackV2 or GreyV1 as they say in many...
View ArticleClik here to view.
Dental Resin SG more clouding than usual?
@JLeeSuneris wrote: Hi, We use the dental resin SG for creating sterile parts for our sterility testing and applicator tips. I have noticed that through 3 prints the tank seems to cloud a lot more...
View ArticleLeaking New Clear Resin Tank in Unopened Bag
@Kilmare wrote: I just received my new Form 2 this week and after letting it sit for a day I set the printer up and removed the resin tank from its box to discover the tank had leaked inside its bag....
View ArticleClik here to view.
When you can't afford a Form Cure
@Richard_Kagerer wrote: Posting this so you can all have a laugh. Didn't think this large part would get even enough exposure in my UV Sterilizer so I hacked together the world's sketchiest cure oven....
View ArticleClik here to view.
Second hand Form
@jimmyrubiks wrote: Hello everyone, I'm an engineering student in Belgium and I'm working on a magnetic leviation project. I use an old 3D printers that I made with some part of Prusa I3 but the...
View ArticleClik here to view.
Problems with printing?
@SFernandez wrote: Hi guys..I just print this in my Form 1+ COPIA.JPG1030x789 61.8 KB All rims came out perfect except the two marked in the photo that didn't adhere to the building platform...Is this...
View ArticleSeeping resin after being cured
@fixateddesign wrote: Ive been having issues with my prints continuing to seep resin after curing. Am I not keeping the print in the alcohol bath long enough or not letting cure long enough? Last...
View ArticleClik here to view.
What to do with resin printed supports?
@ThibautSa wrote: Hello Every one, Since I have my Form2 I have been printing many things and I have accumulated so many resin supports (and some badly printed parts) that I could build a...
View ArticleClik here to view.
HO Scale D&RGW GS Gondola Project with the Form 2
@CoreyBonsall wrote: I just wanted to share what I've been working on: a series of HO scale drop bottom gondolas that were used by the Denver & Rio Grande Western Railroad from the 1920's to the...
View ArticleClik here to view.
Lumpy Tough Resin
@jeeboont wrote: I just bought a new Tough Resin cartridge and had problems getting it to fill up the resin tank. When I checked the resin, it became obvious that it was these jelly-like lumps were...
View ArticleJoin us for a first look at Form Wash and Form Cure
@Frew wrote: We're excited to host a webinar showing off the new Form Wash and Form Cure units. Join us to learn the basics of why post-curing is important for SLA 3D prints and to see both Form Wash...
View ArticleBurning High Temp Resin Dangerous?
@ADavis10415 wrote: Hello all, I am looking to use high temp prints as shielding for welding applications. I've done preliminary tests with poorly cured (hoping to get the new curebox and fix that)...
View ArticleResin tray modifications
@Ontwerpduo wrote: I've been using the F2 for a 1/2 year now and used a lot of trays. Because of the expenses and the problems I have sometimes with the original trays I'm thinking about modifying...
View ArticlePutty or epoxy that works with your print
@fixateddesign wrote: I have a successful set of prints but on piece has a bit of a chip on it. I plan to cast my prints so I'm sanding and prepping my parts. What epoxy or putty that air dries and...
View ArticlePreform crash when changing material
@fantasy2 wrote: Got a strange problem here. As soon as I start preform and change the material, it simply crashes. When I don't change the material, everything works as intended. I tried to...
View ArticleClik here to view.
Resin and Wifi
@grogbro wrote: So I ordered new resin and this is what I got. As I looked at the clear package it was in, it seemed like there was moisture in there, and I was wrong, it was resin. The cap is double...
View ArticleClik here to view.
Another help with part orientation
@brainglow wrote: Hi! I've got a design project and the customer want this to be printed on my Formlabs 2, with grey resin. If we had more time we would probably print it with Copperfilled PLA but...
View ArticleError 9001 again
@KellyD wrote: I am getting this error when trying to upload a new print to the Form 2 printer. I have already read old posts that suggest memory full. I only had one print stored on the printer....
View ArticleClik here to view.
Form 1+ with Accessories for Sale
@Ben_Wilson wrote: Selling fully-functional factory reconditioned Form 1+. Printer has been well cared for and well maintained in an office environment. It has a total of about 400-500 hours of print...
View ArticleSupport Settings for High Temperature Resin
@Telemetry3D wrote: I was curious what others have found to be the ideal support settings for the High Temperature resin. I have found that the 0.8mm point size was causing a lot of chipping during...
View Article