Looking for a broken Form 1+ printer
@DavidRosenfeld wrote: I am interested in acquiring your broken / non-functioning Form 1+. If you are interested, please message me. -David Posts: 1 Participants: 1 Read full topic
View ArticleLead screw on Z
@koleys wrote: I would like to recommend adding about greasing the lead screw. I came in today listening to a dry lead screw. If I would of known about it when I read the maintenance. I would of been...
View ArticleClik here to view.
Edward Elric from Full Metal Alchemist with form2
@richard2812 wrote: Hi everybody, I want to share with you my last hobby action figures I've made of Edward Elric from Full Metal Alchemist 3d printed with the form 2 at 0,5 of resolution with black...
View ArticleResin Cartridge Missing
@Mully wrote: Been having issues with our Form 2 where at some point during a print it would stop and display the error message "Resin cartridge missing", or something along those lines. It's an easy...
View ArticleForm 2 New Tray Wiper Rubbing Bottom of Tray - Is this Normal?
@innovtr wrote: Good day, I just replaced my Form2 tray and I noticed after installation when the wiper went to place itself in the start position it was rubbing against the bottom of the silicon tray...
View ArticleClik here to view.
Protection Glas/Case
@AS3Ddruck wrote: Hey Guys, i got a Question abount the Case/Glas that covers the Printer.Does this realy protect me from the UV Light that comes from the Printer? And what type of Material is...
View ArticleCured Grey V3 resin all over build plate and messy flash around prints
@epicmcd wrote: Hi all, really need some help here brand new form 2 yesterday 1st print run was perfect (yesterday eve) 2nd (this morning) was flashy and made a real mess of the build platform - (this...
View ArticleClik here to view.
Holes and distorted
@nick_pallarca wrote: We've been having issues with our printer and the support wasn't able to help us. We've probably done 8 prints and none of them were printing correctly. We got the printer...
View ArticleAll about Durable Resin
@TomGraham wrote: Hi all!Recently bought some Durable resin, and have just completed my first print. Just wanted to know if any of you have had experience with both the printing and finishing...
View ArticleHelp needed for clear aligner treatment planning
@Deepchheda wrote: Hi,I have form 2 printer and 3shape software and planning to make clear aligners. Can anyone experienced in this field guide me for treatment planning for initial few cases. I am...
View ArticleClik here to view.
Form2 Rough Edges on Print is the Normal?
@innovtr wrote: Good day, my Form 2 is pretty much new and I have a brand new tank in and new bottle of V2 white resin. In my last few prints I noticed a bumpy surface "please see images". I'm using...
View ArticleWhere is the leveling tool and USB cord?
@Walter_Gillespie wrote: I unpacked everything that came with my Form 2, both boxes. I found the power cord all by itself but didn't find the leveling tool or the USB cable. All the boxes I found...
View ArticleClik here to view.
What do you think what is the cause for this issues?
@Nowhere85 wrote: Hey folks, Im beginning to have printing issues with my Form2..here are some pics: IMG_20170410_100922.jpg1984x1120 391 KB IMG_20170410_100940.jpg997x883 240 KB...
View ArticleClik here to view.
Isopropyl turning white and making goo
@Ficus wrote: Hi there, i'm having a strange problem in my isopropyl vat. Mostly in the first bath. My vat is turning white and there is some strange goo on the bottom. What is happening here and is...
View ArticleClik here to view.
Schanuzer baby
@garyrowe wrote: First print with the Form2 - a little miniature schnauzer Posts: 7 Participants: 5 Read full topic
View ArticleBest Material for Thermal Conductivity, Electric Insulator
@nour wrote: Hey ya'llI'm part of a solarcar team, and part of our designing of the car is the design of a battery pack/battery modules. In the past, we have used ABS plastic, but I was wondering if...
View ArticleClik here to view.
Rippling Surface from Supports - What am I doing wrong?
@chris_ell wrote: Hey Gang, So I mostly print organic shapes, and haven't run into this issue until I started printing parts on 3D hubs. Whenever I print a flat sided object, the side with supports...
View ArticleHow do I use the FULL liter of resin?
@yoderkl wrote: Assuming that I have one cartridge of resin, and one resin tank, how is it possible to use the full liter of resin? At a certain point, the cartridge becomes empty and cannot dispense...
View ArticleForm 2 dead after first print
@Walter_Gillespie wrote: Started up my new Form 2 this morning for the first time. Loaded a job across and after 6 hours it printed a perfect part. We were having major T-Storms move through the area...
View ArticleLooking for this new feature on PreForm future updates
@RetXpres wrote: Form 2A future improvement I think the form labs PreForm Software is missing is a "Settle" feature. This feature is used to make sure that the models are absolutely flat on the build...
View Article