Clik here to view.
Print defect
@kilo3d wrote: Hello,In the printed part a line parallel occurs at the base (the cylinder should be completely smooth throughout its length), at a height of about 5mm from the base. This defect...
View ArticleSaving Resin
@Ken_Weiland wrote: Just wanted to know if, after a print, is it ok to squeegee the unused resin off the build platform and put it back into the tray?I didn't think this would be an issue and it...
View ArticleCan you strain and reuse resin from a tray with cured resin on the bottom?
@blochowiczm wrote: So I just went to check on my print and had to abort it because I could already see that it was failing badly, luckily it was less then 2 hours in. So I was combing through the...
View ArticleSell my Formlabs 1 + printer build 10/2014
@Edwin_Roukema wrote: Hereby I'm selling my great Formlabs 3D printer model 1 plus. I bought this printer in October 2014 and used it max 40 times.It is working perfectly fine but as you can see on...
View ArticleWait time between print and curing
@pjeverly wrote: Thanks to all I learned so much about curing from this forum, I've ordered all the components to build a nice curing station. But, in the meantime, I am in the middle of a rather...
View ArticleScarring from Support?
@Mo3dPrinting wrote: I'm sure this has been discussed already but I haven't been able to find anything. Does anyone else get surface scarring from support removal? I'm familiar with FDM printing and I...
View ArticleZ-axis stopped working; servo dead?
@Steven_Hines wrote: I've been printing a fair number of items recently. This morning I started a multi-hour print, walked away, and came back to an error message asking to "remove the obstruction"...
View ArticleWiper motor jammed
@George_Earussi wrote: help my Form2 wiper motor has jammed how do I fix it? trhere is nothing in the tank stopping it I even removed the wiper arm and it still jammed Posts: 3 Participants: 3 Read...
View Article"Pan" the camera in Preform?
@katsubean wrote: Hey- I'm working on a print that has very fine detail. I need to manual set the supports so they will be easier to clean. I have no problem editing the points but I am having a...
View ArticleFaulty 1+ Laser?
@Gavin_Curtis wrote: Hello all. My tank is filling up with tiny partially cured resin particles as well as almost every print being unusable. I did print the butterfly pattern and got 1 of the 5 to...
View ArticleOpen Mode Walk Through
@ASRPRLB wrote: I am very interested in the open mode on the Form2. Are there any full tutorials on how it works? When I read the info in the Support section, it tells me to click on the Printer...
View Article:rainbow: • Z-Vat 2 • Glass Resin Tray Now Available
@ZVat_Industries wrote: Hi Everybody, I'm happy to announce that the Z-Vat 2 is now available. Continuing off of the popularity of the original Z-Vat, the Z-Vat 2 is a glass bottom resin tray...
View ArticleLooking at upgrading to the Form 2. Anybody willing to print this small test...
@Gavin_Curtis wrote: Hello all. Currently have a Form 1+, but the inability of it to produce consistent quality parts has my patience exhausted. Looking for something better. When I print a part like...
View ArticleUltrasonic w/ YM
@dunginhawk wrote: So I just got my ultrasonic cleaner in.. With Yellow magic, how long as you guys cleaning the parts?I ran it for about 7 minutes last night and it still felt quite...
View ArticleResin Tank Slipping
@MarioSpeedwagon wrote: Tried to submit a ticket, but i didn't receive confirmation so I'll throw this up here. The problem is that when the resin tank does the peel move side to side between layers,...
View ArticleClik here to view.
Solar curing
@wertless wrote: Just got our Form2 and while waiting for our nail curing device to arrive i thought I'd give the old solar cure a try. Any suggestions as to how long I should leave it there. It's...
View ArticleFlexible resin finish
@Devin1 wrote: Hello, I am working on creating anatomical prints out of flexible resin. With that I have two question that I am hoping someone has done something similar or has some ideas. Having a...
View ArticleClik here to view.
Closed hole(gem cut) when print with castable resin & form2
@zomorrodjewelry wrote: IMG_6241.JPG3264x2448 860 KB IMG_6238.JPG3264x2448 890 KB IMG_6244.JPG3264x2448 495 KB IMG_6258.JPG3264x2448 840 KB IMG_6259.JPG3264x2448 944 KB Posts: 3 Participants: 2 Read...
View ArticleMaking castable jewelry
@buyn4keeps wrote: The problem I have is that most of the current jewelry companies out there they produce plain BLAH castings and they are expensive! The next problem I have is going thru a casting...
View ArticleFun to do resin F1+ Blend
@paboman wrote: Hi, Ive bought a bottle of Fun to do resin F1+ Blend for my Form 1 +.Is there anything I need to know before pouring it into the vat and start printing? Is open FL needed to print with...
View Article