Clik here to view.
Customizable Z resolution
@Jose_Nicolas_Carriza wrote: now that we have different resolutions in supports and model , its possible have different resolutions in the model? just like slash 3d printer sorry for my english!!...
View ArticleClik here to view.
This is my laser spot test. Good or bad?
@RoydenJames wrote: IMG_4201.JPG3024x3024 757 KB Posts: 2 Participants: 2 Read full topic
View ArticleSigns of material expiring
@DennisGreenlaw wrote: Hi, Is bubbling a sign that a material is expiring? Lately I'm noticing more bubbling inside our Form 1+ Gray prints, especially along straight edges, and I was wondering if...
View ArticleClik here to view.
Micro scratches on main mirror
@TobiasJ wrote: Hi, I noticed some micro scratches on the main mirror of my Form 1+. The printer is more than a year old and I have always used the recommended PEC pads for cleaning the main mirror. I...
View ArticleUntilted prints
@DanCarlberg wrote: Q: Does anybody know why it´s not possible to have the prints "untilted" when printing? In a lot of cases this would for sure generate less support structure. A straight tube f.ex...
View ArticleClik here to view.
Print doesn't stick on the platform
@Cristina wrote: Hello Everyone,I am having troubles to print a part and I am writing to ask for suggestions. I tried to print a small part, base dimension about 2 x 1.5 cm. It didn't stick on the...
View ArticleFogged Resin Tank Form2
@Pablo wrote: Hello, The bottom of my resin tank has fogged up, preventing good quality prints. Does anyone know why this happens and how I can resolve it? I tried gently scraping it to remove any...
View ArticleClik here to view.
FORM 1/1+ Build Platform NEW 80€
@Matej_Korytar wrote: Hi,I have one new unused Build Platform for FORM 1/1+ for saleLocation: EU/Slovakia, Bratislava 2016-09-09 22.20.22.jpg4032x3024 1.54 MB 2016-09-09 22.20.35.jpg4032x3024 1.56 MB...
View Article"Phone Home"
@JohnK42 wrote: My firewall messages me dozens of attempts every 10 minutes of "phoning home", even when the printer is in sleep mode.The Form 2 tries to send data to "Amazon Web Services" via port...
View ArticleStoring Preform processed Files off the printer
@billiejean wrote: Is there a way to store a previous Ripped file that was sent to the printer on your computer. I am in the process of creating a bunch of kits and I would like the ability to remove...
View ArticleInternal support editing
@obm wrote: I would like to be able to edit internal supports in a volume, which does not end at the base, but end at an internal surface of the volume in question. There could be an "internal support...
View ArticleClik here to view.
Crap - fw update is completely hung
@ChristopherBarr wrote: So THIS is why I was still on 1.9.1 and was not upgrading... I finally found where the fine tuning settings were hidden (it makes sense to be in 'Printers...' now since more...
View ArticleClik here to view.
Passable Lens from Clear Resin
@Volguus wrote: I just read how an entire camera, including lenses, was printed on a Form printer. Since I had a minor upgrade job for a costume which included a lens, I figured I'd give it a try....
View ArticleResin Definitions?
@3DTOPO wrote: I looked at OpenFL hoping to gain an understanding in the similarities and differences of the various resin profiles, but I only see one profile for clear in the...
View ArticleISO Form1 Tank (used or new)
@madmax13 wrote: Hello, looking for a cheap resin tank for experimentation. Thanks Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Micro print
@ChristopherBarr wrote: I don't get to post my work often, but I felt I needed to do it now just to show what the Formlabs printers are actually capable of. After a bit of a scare with Firmware, I've...
View ArticleIPA inside build platform
@WendellLuncefor wrote: After a recent print I had bits and pieces of resin firmly attached to my build platform. I did what was suggested a year or so ago, soak it in some IPA. I put it in a basin...
View ArticleXY fine tuning Form 2
@JoeC wrote: Hello, Fairly new user here with a Form 2. We build a lot of prototype housings that will eventually be made out of injection molded plastic. I have had great luck with surface finish and...
View ArticleProgrammable start time
@kfmurphy wrote: I use a Form 1+ at work, so I only have access to the printer during business hours. It would be great if I could set a timer to control when it starts printing. Currently I can only...
View ArticleI just pulled the trigger :)
@dunginhawk wrote: You are going to be seeing a lot more of me around here soon... This afternoon I placed my order for a form 2. My hopes are to use it for some dental modeling (my friends all seem...
View Article