Formlab in Italy (or near)
@Astratiformlab2 wrote: Hello everybody! We are a 3d printing company in Genova - North of Italy. We have a Form2. We're looking for someone who has a Form2 near to us to start to talk about possible...
View ArticleRemoving resin from very narrow channels
@datasmasher wrote: Does anyone have advice for clearing 400 micron channels of resin? I don't think I can use IP because it will cause the channels to narrow. Are there other options folks have used?...
View ArticleProblem sensor next new update
@Patrick_NOWAK wrote: My Form 2 is now update and all sensor don't have the good sens. If i level the printer the printer is curve ca ni go back to an ils version ??? I must print for tomorrow Posts:...
View ArticleUsed resin tanks for Form 2
@Joe90 wrote: I would like to recondition the resin tanks by replacing the PDMS layer.If you have any that you are throwing away, happy to postage for you to send them to me! Anyone interested? If I...
View ArticleClik here to view.
Lasers for print post-cure and for bonding separate parts with resin
@Randy_Cohen wrote: I've been using my budget curing jar design for post-curing prints with excellent results. But there have been a few instances where a print failed, or I busted something pulling...
View ArticleClik here to view.
Very happy with my Form 2 - first printing
@Sonia wrote: Hi, I'm new here I am very impressed with the print quality offered by form 2I am looking forward to experiment and learnThis is my first impression ( I designed a small articulated...
View ArticleTesting helloooo
@Oovil wrote: Hello world whow are you i am new here Posts: 2 Participants: 2 Read full topic
View ArticleBarely Used FormLabs Form 1+
@Paul_Vang wrote: I've decided to sell my printer at a loss. I paid $3700 for it brand new about a little over a year ago. Did a few test prints and that was about it. I just dont have the time for it...
View ArticleClik here to view.
Supports vs. Not Enough Supports
@Volguus wrote: Coming from FFF printing, I always wondered about why Form-type printers needed supports. Printing upside down works with gravity, not against it. What's to support? Well, I have my...
View ArticleExperience printing spot-a resin with form2
@Luckybur wrote: Hi all. i´m looking for a resin like the black from formlabs but with a heat resistance over 80ªC and a better impact resistance. I´ve been reading old threads about other resins and...
View ArticleClik here to view.
Surgical guide printing issues
@drerichuang wrote: Hello I recently bought a formlabs 2 printer and is printing my own surgical guide for implant procedures. I am designing the guide using a software called blue sky plan. I will...
View ArticleClik here to view.
Form 1+, only 8mo old, complete kit, free 2-day shipping, $1650
@gdmccormack wrote: Form 1+ reconditioned unit only 8 months old. All original packaging and same contents as original kit with 1L clear resin and unused resin tray. See posting for pictures along...
View ArticleMore misery from my form1+
@Francesco_Pessolano wrote: My form1+ experience has been an expensive joke. Sometimes it prints, sometimes for no apparent reason it does not. Sometimes I was an entire bottle of resin and a tray...
View ArticleMultiple users access dashboard
@StevePeters wrote: Recently i have been working with a partner. It would be nice if we could both access the dashboard. It would also help if notifications could be sent to multiple people. For now,...
View ArticleClik here to view.
Recent Print Projects - Monsters and More!
@Mitch_Gates wrote: I wanted to share some of the fun projects I've been working on the last several months. I've been honored to help several VERY talented sculptors and FX artists translate some of...
View ArticleOBJ mesh group independance
@KenCitron wrote: If we could import an obj file have PreForm see named mesh groups from that file and allow us to arrange and orientate them independently then this would save some time.Often I have...
View ArticleClik here to view.
First print :)
@robbedoes wrote: Hi everyone, made my first print and I am impressed! IMG_6716.JPG3264x2448 2.21 MB Posts: 4 Participants: 2 Read full topic
View ArticleOld FORM files in new Preform: "Scene Corrupted"
@Volguus wrote: In early 2014 our local FabLab got a Form1 and I made a few test files in Preform 1.2.1. I recently found the files again and tried to open them in PreForm 2.6.0. Every one of the old...
View ArticleClik here to view.
Stuck problem
@Juha wrote: form-2-problem.jpg1000x1000 688 KB Hello!First, sorry my english. It,s bad, like my latest prints.In pic you see my problem. I'm tried to fine tuning, sanding and resin filtering. Nothing...
View ArticleClik here to view.
Strange problem with moving parts
@Astratiformlab2 wrote: Hi!I have printed a small anchor (with Form2) with a moving part, with clear 03 at 0.1 mm, without any problem; I left a gap in the bond of 0.4 mm.The problem appear when i...
View Article