Clik here to view.
Printing thin walls with no supports
@IsaacKatz wrote: Hi, Would it be possible to print a thin walled object with straight edges straight on the platform without supports? What would be the minimum recommendable thickness of the wall to...
View ArticleBed levelling during print V2.3.1
@Will_Howden wrote: So i seem to be one of the lucky ones that got firmware 2.3.1 to upload ok. Now my printer stopped during the print saying the bed is un level. I used to have this with a few...
View ArticleCuring Procedure
@additivemedical wrote: I've read the formlabs article about how best to post cure 3d prints....
View ArticleClik here to view.
First print from a Mothballed Form1+ 10 months on
@Walter_Gillespie wrote: My Form1+ was basically mothballed for 10 months due to serious illness, now over. I had cleaned the unit up, put in a new build tray and covered it with a large satin cloth....
View ArticleClik here to view.
What may have caused this feature to print broken?
@Alfredo_Sola wrote: Hi,what could this be? The big flat feature is interrupted like broken, but the rest of the print has continued.Of course it is not broken in the design, and it appeared fine in...
View ArticleResins different printing time
@IsaacKatz wrote: Hi, I am about to order my printer. Trying to decide which resins to get. A major consideration is printing time. I noticed on preform when you change resins it can dramatically...
View ArticleLights of Wood
@MauroCampana wrote: Someone tried to cure the resin with the Wood lights ? thanks mauro campana Posts: 1 Participants: 1 Read full topic
View ArticleSLASH resin printer on Kickstarter
@Shen wrote: Hi guys,There is a new printer on kickstarter:Looks like it prints well, and the price is low. It's almost too good to be true. What do you guys think it will compare to Form 2? Also the...
View ArticlePreform no longer recognizing Form 2 over wifi
@Richard_Beck wrote: I have a form 1+ connected via USB and a Form 2 which I have been suing via wifi. Today, I downloaded preform 2.3.2 because I always do and rarely have issues. Well..... The...
View ArticleNew Cartridge not filling
@liqdfire wrote: Inserted a brand new cartridge, and opened the vent cap. The printer was stalled on waiting for resin to fill the tank. I closed the vent cap, and removed the cartridge for...
View ArticlePreForm not generating all required supports
@pbloom22 wrote: Can anyone explain why the automatic support generation capability in PreForm leaves some support hot spots (red zones) that require manual insertion of supports? Posts: 1...
View ArticleClik here to view.
Hard problem Formlabs+1
@dante_isopi wrote: Why this problem? image.jpeg4032x3024 1.81 MB image.jpeg4032x3024 2.31 MB image.jpeg4032x3024 2.46 MB Posts: 3 Participants: 3 Read full topic
View ArticleClik here to view.
Yellow Magic is now sold on Amazon
@KenCitron wrote: For those using or seeking to use a water based system and/or had the opportunity to try Yellow Magic from Bradley Systems can now purchase it through Amazon in 1 gallon quantities....
View ArticleLifetime hours
@Declan_Halpin wrote: Hi all, I know I've seen this somewhere, but now I can't find it..... I am selling my Form 1+ (upgraded to F2). How do I see the life-use hours on the machine for buyers' info?...
View ArticleGalvomotor model
@saadahmd wrote: Can anybody have the information the exact model no of y galvomotor. My y galvomotor is dead and i want to replace it. Or can any body tell me the origin where can i get that motor...
View ArticleClik here to view.
Triops printed on form2
@KlausLeitl wrote: Its great to print a triops. Only the antennae are not printed. 50 cm long. Triops-08a.jpg2592x3872 253 KB Triops-03a.jpg3872x2592 376 KB Triops-11a.jpg1555x2323 372 KB Posts: 3...
View ArticleClik here to view.
Dashboard material manager feature request
@Richard_Beck wrote: When I saw the announcement today I was pretty happy because I thought it would automatically flag me when a cartridge tank was nearing empty or a resin tank was reaching its...
View ArticleClik here to view.
First Prints, Just Got Form 2, Ordered end of Dec
@Draconious wrote: First test Prints came out great.I really thought the tiny guns on the X-Wing would bust off mid print, but they are intact, Fragile as heck, but intact. Print1.jpg960x540 42.3 KB...
View ArticleNew resin formulation?
@Will_Howden wrote: Does anyone know (Q Formlabs rep:) what they have done to the resins? Looks like the flexible in now black but other than that its hard (or I am looking in the wrong place) to work...
View ArticleImpression ne colle plus a la plate forme
@MALO58 wrote: Bonjour, J'ai une Form1 + et j'ai un problème d'impression, elles ne tiennent plus sur la plate forme.J'ai essayé différentes impressions et ça ne fonctionne plus, pouvez-vous me dire...
View Article