Clik here to view.
Model Orientation in Preform
@Phantom48 wrote: I have a model I am trying to scale to match an original size. I scale what I thought was the X orientation because I measured the X dimension on original. I did see that the grid...
View ArticleRe-washing after drying and removal of support
@Phantom48 wrote: I am using the standard gray resin, on occasion I get a sticky spot or two. I have the standard wash method, 10 per each. I have re-washed and srubbed with a soft brush in IPA after...
View ArticleTheory on mixed experiences with Black V3/V4
@Ante_Vukorepa wrote: Did my very first print with Black V4 (my previous experiences have been with V1 and V2) and i’ve noticed some things… Now, first of all, the print came out beatifully. No issues...
View ArticleClik here to view.
An extremely difficult printing (Apollo and Daphne)
@hokololo wrote: Screen Shot 2018-02-13 at 2.14.17 Pm.png872x876 287 KB Hi all, I have recently planned to print this particular model....
View ArticlePrint with infill specs
@fsd wrote: I everybody, i work with 2 kinds of 3d printer, FDM and SLA form2 and i think the addition of infill option with possibilities to change spec would reduce the printing time as well as the...
View ArticleParts are the wrong size
@Vital1 wrote: We’ve got a few form 2 printers using clear resin, and have recently noticed that some parts are 1-2mm too big. I know doesn’t sound a lot, but it is when you are working to 0.5mm...
View ArticleThe formlabs comportment is very nooo good
@ortodontica wrote: I would like to express in this forum my disappointment for the comportment of the formlabs, I bought the printer from a local retailer in Rome. After a week from the purchase I...
View ArticleTwo photon polymerization on glass substrate
@hnguyen56 wrote: I am trying to make polyethylene glycol diacrylate (PEGDA) micro pattern on glass substrate, but find it hard to keep the pattern on the surface of the glass after cleaning the...
View ArticleMesh Prints as solid, not as a mesh
@Rob_Steinberg wrote: I have a model made using Zbrush, about a million polys, which has a section made using the “micromesh” tool, yielding a mesh which has large enough holes that should print...
View ArticleClik here to view.
Mark on the tank due to wiper peg
@Nicolas_Rozet wrote: Hello. I didn’t find something about this so i post here: Since the begining with the form 2 i get strange mark near the middle of the tank after i use it. I finally discover...
View ArticleClik here to view.
Printing with a Voltera V-One on PCBs printed with High Temp resin
@Steven_Hines wrote: I’ve been experimenting with using my Voltera V-One to print conductive ink traces on parts printed on my Form 2 with FormLabs High Temp resin. I describe one iteration of the...
View ArticleChanged clear resin tank over but now get an error
@kieren12 wrote: Hi All my start tank of v2 clear resin finally ran out so i purchased some new resin. i now get an error saying that the printer will only use v2 resin and not v4. how do i make it...
View ArticleA resin for model or toy production
@fixateddesign wrote: I was curious if there is a resin that Formlabs makes that would work for toy or model production. I have experience with the regular grey resin, and have made prototypes that i...
View ArticleMirror an image with preform
@DavidGraham wrote: Our Form2 is in the order process, when the printer arrives will I be able to mirror an image and save it with the Preform software Posts: 1 Participants: 1 Read full topic
View ArticleCompatibilty issues windows 10 and Form2
@DavidGraham wrote: Can I run Windows 10 without any issues using the Form 2 Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Selling all consumables and Formlabs stuff i have
@cfrank78 wrote: Hi everybody! I gave my Form 2 back, because i was not happy with it and now i am selling all my consumables and rest pieces i have for a extremely low price! The resin is an “add on”...
View ArticleOptical glass issues
@Olivier_Suire wrote: I recently realized that for some reason, there was a sort of haze on the underside of my optical glass. I reached to the support to get the procedure for cleaning it, and here’s...
View ArticleError 41 problem again
@Picker wrote: Hello, I have got an error 41 during printing. Again. First time was 2 weeks ago. I perfomed recommended action (checking and reseating cables for galvanometer) but without success....
View ArticleClik here to view.
Cant upload
@Sonata wrote: Hey everytime i want to upload here it comes image.png898x392 22.3 KB but my file is only 2mb big… Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
What it the best Way to print this?
@Sonata wrote: Hi i have to print this file: https://www.dropbox.com/s/gjplo49uulg0kf9/Rund%20Deckel%20%28Cut%201%29.stl?dl=0 but all ways i find, the support is in the fine details image.jpg1208x1067...
View Article