Clik here to view.
Back of head keeps cracking and splitting? (3d model ;)
@FormBeast wrote: Hey all, I sent a head model to a friend to print on the Form 2. First thing I noticed is the back of the head nearest the platform cracked. I then made the walls thinner in the head...
View ArticleFlexible Sample Tacky
@Joestefano wrote: I received a sample of Flexible today it is extremely tacky to the touch. That can't be normal. I going to put it under the lights for a bit. Posts: 3 Participants: 3 Read full topic
View ArticleSelling my form 1+ on ebay (UK based)
@Gary_Cairns wrote: As title says, http://www.ebay.co.uk/itm/272761392441?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Selling my form 1+. I'm based in the UK. Posts: 1 Participants: 1 Read...
View ArticleClik here to view.
Small hole
@poping2 wrote: Good morning. I found a small problem. It found a small hole in the head of modeling. Why is this? I wonder why. Do we need to place the supports more tightly? I did not see any...
View ArticleHow the Form2 peeling works?
@MattiaMercante wrote: Hello,few days I have the Form2 and everything fine. I am printing large piece and I notice the typical "suction noise" (the "stump" sound we used to know also with Form1/+). I...
View ArticleClik here to view.
Introducing Monthly Dashboard Reports
@Frew wrote: Today, we're excited to announce a new Dashboard feature - monthly printing reports. At the beginning of each month, you'll receive an overview of the past month's printer and material...
View ArticleClik here to view.
Endless "Missing Cartridge" messages
@pmg wrote: Every time I start a new print, my job runs for about 7 layers then I get a dreaded "Missing Cartridge" error message. Lifting the cartridge up 1cm and lowering it again 'fixes' the issue....
View Article3dHubs new guidelines--can the Form 2 meet them?
@andyfilms wrote: A few days ago, 3dHubs (a large crowdsourcing 3D printing-service site) released updated SLA guideslines. Basically, anyone who wishes to sell on 3DHubs must meet these guidelines,...
View ArticleMaking own mix and using a specific cartridge to print
@Ontwerpduo wrote: I'm making my own mix of 3 types of FL resins and getting great results when I print them in a specific cartridge/mode.Since this type of cartridge/material is only 10% of the total...
View ArticleClik here to view.
Duplicate in Preform scattering issue
@FormBeast wrote: So I have placed many of these tiny lenses into position and want to select all of them and duplicate and move into position so I get nice rows. The problem is when I select them all...
View ArticlePrinter has just stopped doing anything!
@WRC wrote: I have a new Form 2 printer. This second print is about 26 hours into the print, the display says there are 18 hours left but the printer has just stopped doing anything with the build...
View ArticleScaling in one axis
@Paul_Hollingshead wrote: There is an old thread here about scaling in one axis: Autodesk's Meshmixer (3.2) can do that. I wanted to make a downloaded phone stand wide enough (2.5 x) to be a tablet...
View ArticleMy Form2 Printer will not start
@WillDental wrote: I'm hoping someone can help me here. I came to work this morning and I tried to print something, but after the step where it asks to open the cartridge vent and check the build...
View ArticleClik here to view.
First print - tiny statue replica
@EBL wrote: Hey all, Just wanted to share my very first (and very simple) print with the Form 2. I used grey resin and have yet to post-process. If anyone is familiar with La Victoire de Samothrace,...
View ArticleClik here to view.
Härtekammer im Eigenbau
@rczak wrote: Hallo,inspiriert aus dem Nachbarthread würde ich gerne auch hier einmal Leben hineinbringen und meine Variante vorstellen.Aus den Einzelteilen eines Fingernagel Aushärtegeräts ist diese...
View ArticleForm 1+ Skewed Prints Square coming out rectangular
@jprochnow wrote: Ok I need a little help. I recently sold a form 1+ that was in great working condition but when the buyer received it he is telling me the prints are skewed. He shot a video of a...
View ArticleAdd warning message to "Prinitability" when there's red
@usrfrnly wrote: I have missed red on prints because it takes so long to show up on bigger prints and i know people who have missed it because they're color blind. a small blob of red that you have to...
View ArticleDashboard - age of resin
@themedulla wrote: One thing that would be useful to me would be to see the age of the resin on the dashboard. At least the date of first use. It would be much nicer than scribbling the date on the...
View ArticlePreform - Manually analyze printability
@Richard_Kagerer wrote: Is there a way to manually kick off a printability analysis? I've noticed Preform gets confused after some actions and abandons the in-progress analysis (e.g. if you save the...
View ArticleMake Honeycomb structure
@gaelp wrote: Hello, I want to print a object with a "honeycomb" structure, but it's possible with printer with resin ??It would be practical for it to be lighter ! I don't have found a good software...
View Article